Identificador: 2851
Abierta
.PNG)
.PNG)
Descripción
PARTE: 2MK-HBM.1000 - BISAGRADORA - 1.5 HP
Is a compact, high-precision machine designed for efficient hinge and hardware installation in cabinetry and furniture production. Powered by a 1.5HP motor, it delivers accurate 35 mm hinge cup bores using a carbide-tipped bit—ideal for hinges, mounting plates, and connectors.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase - 110V 13.6 AMPS / 220V 6.8 AMP |
| Motor Specs | 1.5 HP / 1.1 KW 3400 RPM |
| Table Size | 18” x 31 - 1/2” | 460 x 800 MM |
| Machine table height | 5 - 3/8” 136MM |
| Machine table depth | 2- 3/4” 70MM |
| Hinge boring Bit Diameter | Carbide Tipped - 35mm |
| Hinge boring Bit Rotation | Right |
| Hinge boring shank | 10MM |
| Hinge boring Length | 57MM |
| Drill bits Diameter | Carbide Tipped - 8MM |
| Drill boring Bits Rotation | Left |
| Drill boring shank | 10 MM |
| Machine Dimensions (LxWxH) | 33 7/16”x 28 3/8”x31 1/2” | 850mmx720mmx800mm |
| Number of Stops | 2 Left / 2 Right |
| Maximum Depth of Stroke | 4 - 5/16” | 110MM |
| Boring distance center spindle | 0 - 2 3/4” | 0 - 70 MM |
| Air requirement | 90 PSI - 3 SCFM |
| Machine Weight | 50Kg 110LBS |
| Avg Noise emissions | 78dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA PARA CORTE, RECORTE Y RANURADO
PARTE: 2PI -TSS - SIERRA PARA CORTE, RECORTE Y RANURADOWas designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.Tear-out FREE! Absolutely no tear-out on the cut boardsVery safe operation for the userMore accurate than a manual chop sawFrame is designed to sit flat or tilted at 10 degree angleTigerStop ready
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 7 RUEDAS - PIEZAS CORTAS
PARTE: 2CK-DC70For woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.Ideal for feeding of short material7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)Universal stand allows the operator to change the feeder for vertical to horizontal feeding direction or angles as desi...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
AMXmachinery1
PARTE: 2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
PARTE:
2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
NUEVA CON GARANTIACapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise thic...