Identificador: 1201
Abierta
Descripción
PARTE: 12209 – BOMBA DE VACIO – RUVAC
USADO
BERLIKON
LEYBOLD VACUUM
TYPE: WSLF 1001
PRODUCT # 11794
MFG: 2009
50/60 HZ
S (M3/H): 1000/1200
CE
MAX PRESSURE : 8- MBAR
MADE IN GERMANY
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHOUSADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 HighMade
in the USA
It
typically designed to cut structurally insulated panels but you could pretty
much cut any material.
It
is desig...
AMXmachinery
PARTE: 12607 - SIERRA RAJADORA – 1 SIERRA - POWERMATIC
PARTE: 12607 - SIERRA RAJADORA – 1 SIERRA - POWERMATICUsada – Buenas condicionesManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-o...
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
PARTE: 2TA-SET-TRANS –
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
Nueva
con garantíaDiseñada
a la medida para transferir material continuamente entre 2 espigadoras dobles
de cadenaTableros,
puertas, etc.
Aumenta
la eficiencia y disminuye o elimina los manejos manuales
Video: https://vimeo.com/639803360