Identificador: 2214
Abierta
.jpg)
Descripción
PARTE: 3HP-EMA-250 – CABECEADORA - CONTINUA - PARA TABLAS Y PISOS – 40-250 MM ANCHO
ESCOPLO Y ESPIGA
Nuevo con garantía
Specification:
1.Max. / Min. Width: 250mm / 40mm
2.Max. / Min. Thickness: 10mm / 35mm
3.Min. Board Length: 270 mm
4.Max. Board Length: Unlimited
5.Max. Board Weight: 15kgs
6.Cutterhead Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2)
7.Feeding Pressure Roller Motor: 1HP W/1HP Inverter
8.Infeed Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1HP Inverter)
9.Cutterhead Feeding Motor (Forward & Backward): 1/2HP W/1HP Inverter
10.Cutterhead Spindle Diameter: Φ40mm
11.Max. cutter head dia.: 160mm
12.Cutterhead Type: TCT Disposable Inserts
(L): 14*14*2mm x 12pcs. 11.8*33.85mm x 4pcs.
(R): 14*14*2mm x 16pcs. 15*15*2.5mm x 8pcs. 11.8*33.85mm x 4pcs.
13.CutterHead Washer: 0.1 to 0.5, 1, 2, 5, 10, 20mm
14.Cutterhead Travel System: Mechanical Actuators
15.Feed Speed: 90M/min.
16.Processing Speed 24M/min. - Base on 2M Boards
17.Clamping: Clamps on Top and Side
18.Controls: Manual or Automatic
19.Air Service Unit: Norgren
20.Air Consumption: 12CFM
21.Dust Collection Hood: 6" x1
22.Max. RPM of Cutterhead Spindles: 7000RPM
23.Table to floor height: 950mm
24.Weight: 1100kgs
25.Packing Dimension with Pallet: 2300 x 1300 x 1600mm /1150kgs
26.With Motor In Feed Roller Table: 3300mm(L) & Foot Stand (3sets/unit)
Without Motor Out Feed Table: 2200mm(L) & Foot Stand (2sets/unit)
27.With CE Standard
28._______Volt,_______Hertz
OPTIONAL: In Feed Conveyor (One Section is 1100mm)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS – BRANDT KDN 210
PARTE: 12494 - ENCHAPADORA DE CANTOS –
BRANDT KDN 210
USADA – MUY BUENAS CONDICIONES
BRANDT KDN 210
220V, 3 Fases, 60 HZ, 2007
Mantenimiento de Homag 2 veces por año
Poco uso – 5 hrs por semana aproximadamente
AMXmachinery
CABEZALES PARA MOLDURADORA - NAVAJAS ESPIRAL
PARTE: 2GL - CABEZALES PARA MOLDURADORA - NAVAJAS ESPIRAL2, 4 Y 6 NAVAJAS----------------------------------------------------------------------------------------------------------20° Angulo de Corte / 18° Angulo Espiral / Espiral mano DerechaLargo de Corte, Diametro Total, # Navajas, Parte #60mm 125mm 2 MSH125-2-60100mm 125mm 2 MSH125-2-100130mm 125mm 2 MSH125-2-130150mm 125mm 2 MSH125-2-150180mm 125mm 2 MSH125-2-180230mm 125mm 2 MSH125-2-230240mm 125mm 2 MSH125-2-240310mm 125mm 2 MSH125-2-31...
AMXmachinery
ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
PARTE: 12128
- ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY
BUENAS CONDICIONES - REACONDICIONADA
Width
Capacity: 68"
Grooved,
Rubber-Covered Applicator Rolls
Applicator
Roll Diameters: 7.75"
Main Motor:
1.5 HP, 208-230/460v, 3ph
Hard
Rubber-Covered Doctor Rolls
Top-Elevator
Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical
Digital Readout for Thickness
Currently
460v, 3ph (Ask about Voltage Change)
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 48” ANCHO
PARTE: 2LO-SET-46TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 48” ANCHO
Nueva con garantiaThe automatic high-speed
through feed device allows for perfect finishing at speeds ranging from 12 ~ 52
FPM.Suitable for mass
production of wood working factory for processing of double end cutting,
tenoning, grooving, moulding, and sanding.It is a powerful machine
great for heavy-duty production.In addition to the
double end cutting, all the settings and other processing can also be exe...