Identificador: 2675
Abierta
Descripción
PARTE: 2GL - CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS
4 NAVAJAS – 12/20 GRADOS
Weinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, Silver
Longitud de Corte, Diametro Flecha, Parte #
| 50mm (1.96") 40mm MH-122-4-50D |
| 1.5" MH-122-4-50D-1.5 |
| 60mm (2.36") 40mm MH-122-4-60D |
| 1.5" MH-122-4-60D-1.5 |
| 80mm (3.15") 40mm MH-122-4-80D |
| 1.5" MH-122-4-80D-1.5 |
| 100mm (3.94") 40mm MH-122-4-100D |
| 1.5" MH-122-4-100D-1.5 |
| 130mm (5.12") 40mm MH-122-4-130D |
| 1.5" MH-122-4-130D-1.5 |
| 150mm (5.91") 40mm MH-122-4-150D |
| 1.5" MH-122-4-150D-1.5 |
| 180mm (7.08") 40mm MH-122-4-180D |
| 1.5" MH-122-4-180D-1.5 |
| 230mm (9.05") 40mm MH-122-4-230D |
| 1.5" MH-122-4-230D-1.5 |
Shapers, Paulson, XL
Longitud de Corte, Diametro Flecha, Parte #
50mm (1.96") 1.25" MH-100-4-50D
60mm (2.36") 1.25" MH-100-4-60D
80mm (3.15") 1.25" MH-100-4-80D
100mm (3.94") 1.25" MH-100-4-100D
150mm (5.91") 1.25" MH-100-4-150D
Weinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, Silver
Longitud de Corte, Diametro Flecha, Parte #
| 50mm (1.96") 1-13/16" MH-137-4-50D |
| 2-1/8" MH-137-4-50D-2.125 |
| 60mm (2.36") 1-13/16" MH-137-4-60D |
| 2-1/8" MH-137-4-60D-2.125 |
| 80mm (3.15") 1-13/16" MH-137-4-80D |
| 2-1/8" MH-137-4-80D-2.125 |
| 100mm (3.94") 1-13/16" MH-137-4-100D |
| 2-1/8" MH-137-4-100D-2.125 |
| 130mm (5.12") 1-13/16" MH-137-4-130D |
| 2-1/8" MH-137-4-130D-2.125 |
| 150mm (5.91") 1-13/16" MH-137-4-150D |
| 2-1/8" MH-137-4-150D-2.125 |
| 180mm (7.08") 1-13/16" MH-137-4-180D |
| 2-1/8" MH-137-4-180D-2.125 |
| 230mm (9.05") 1-13/16" MH-137-4-230D |
| 2-1/8" MH-137-4-230D-2.125 |
| 310mm (12.20") 1-13/16" MH-137-4-310D |
| 2-1/8" MH-137-4-310D-2.125 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA
29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum:
7-1/2"
Throat clearance: 750mm
(29-1/2'')
2 Speed Spindle: 8,100 /
16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position
turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x
101mm (36" x 40")
Table tilt: 45 degree front
downward tilt
Micrometric table raise:
1/32" (1mm) p...
AMXmachinery
LIJADORA DE BANDA ANCHA - 52” ANCHO - 3 LIJAS - TIMESAVERS
PARTE: 12293 - LIJADORA DE BANDA ANCHA - 52”
ANCHO - 3 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
-500x500.jpg)
AMXmachinery
BANDA PARA CEPILLO 12.5"
PARTE # SIL-R-CM12.5B-A26
2 BANDAS PARA CEPILLO 12.5 PULGADAS SILVERLINE
MARCA / TIENDA: SILVERLINE / AMX MACHINERY
- Nuevas y originales.
- Los precios son en pesos e incluyen IVA.
- Enviamos su factura.
- Flete incluido a las principales ciudades de México.
- Pregunte por Cobertura de Flete a su Ciudad y
Tiempos de Entrega antes comprar.
850.00 MXN
AMXmachinery
PERSONALIZADOR CON TARJETERO - GRABADO
PARTE: P-BASE-102-G - PERSONALIZADOR CON TARJETERO - MADERA SOLIDA - COLOR CAOBAMadera solidaRanura superior izquierda para colocar tarjetas de presentacion Medidas: 2.25 x 10"