Identificador: 3062
Abierta
.PNG)
.PNG)
Descripción
PARTE: 3HO-HT600A - CANTEADORA AUTOMATICA ECONOMICA
The single-sided edge banding machine is designed for bonding rectangular workpieces with various edge materials: PVC, ABS, acrylic.
| Banding Tape Thickness | 0.3-3mm |
| Banding Tape Width | 12-60mm |
| Workpiece Thickness | 10-55mm |
| Workpiece Length | >=80mm |
| Workpiece Width | >=45mm |
| Feeding Speed | 12m/min |
| Heating Power | 1.8kw |
| Feeding Motor Power | 1.5kw |
| Glue Spreading Motor Power | 0.75kw |
| End Trimming Motor Power | 0.37kw x 2 |
| Fine Trimming Motor Power | 0.75kw x 2 |
| Polishing Motor Power | 0.18kw x 2 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
PARTE: 2LO-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADASFeatures:A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows ag...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 20"
PARTE: 2CK-PCM508 - SIERRA DOBLE - 45 GRADOS - 20"Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure...