Identificador: 1832
Abierta
ID de articulo : # 1832 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2TA-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
Features:
- A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste with maximum durability.
- Movable screen for changing the size of chips and easy to clean-up.
- Enery efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-1504V |
WG-2535V |
WG-4751V |
|
Entrance Capacity (L x W) |
15-3/8" x 4" |
25" X 35" |
47" x 51" |
|
Rotary Cutter (Sets) |
18 |
30 |
96 |
|
Stationary Cutter (Sets) |
4 |
4 |
6 |
|
Cutter Speed (RPM) |
680 |
85 |
85 |
|
Standard Finish Size or Option |
1/2" |
1/2" |
1/2" |
|
Cutter Head Motor |
20 HP |
30 HP |
60 HP |
|
Feed Motor |
-- |
-- |
1 HP x 2 |
|
Dust Hood |
8” x 1 |
8” x 1 |
8” x 1 |
|
Machine Size (L x W x H) |
56" x 50” x 32" |
87" x 52” x 75" |
106" x 75" x 83" |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO LINEAL - 13 HUSILLOS
PARTE: 2RI-R113 - TALADRO LINEAL - 13 HUSILLOSIs the entry level model in the line drills RITTER has to offer. Is both affordable and built to last. The R113 is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fence is adjustabl...
-500x500.jpg)
AMXmachinery1
SIERRA DE PANELES AUTOMATICA
PARTE: 2CK-TPS-SH - SIERRA DE PANELES AUTOMATICA Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensions sheet components with a chip free finish. Available in 8’, 10’, 12’ with front loading. The powerful 18HP saw motor and carriage runs on two round hardened guide rails on (8) copper wheels. The saw carriage cutting speed is variably adjusted according to ...
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 7.5 HP
PARTE: 2CK-OES509DIs the ideal edge sander for demanding applications for production use. Equipped with a 9” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. Is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and for full utilization of the sanding belt. The dual tables also allow for two operators to be working on the machine a...
AMXmachinery1
MESA PULIDORA - 36 X 72 PULGADAS
PARTE: 2CK-3672DTErgonomic and energy efficient and offer easy operator maintenance. The table is mounted on wheels and can be easily moved around your shop. This is perfect for light to medium duty woodworking applications such as sanding and finishing.The most innovative and efficient downdraft dust collection tables on the marketInnovative filter design acts as dust trays to capture 100% of collected dust particlesFilters can be easily emptied, cleaned, and replaced in less than one minuteThe...