Identificador: 425
Abierta
Descripción
PARTE: 2GM-949VPKG - CENTRO DE MAQUINADO
NUEVO CON GARANTIA
Standard Features:
- Taiwan Mill
- “Meehanite” Casting
- “Turcite B” Coating on X/Y ways
- ISO 9001 certified
- Coolant system included
- GMM-949V has variable spindle speeds from 70-4,300 rpm
- Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion )
- Heavy Duty “Meehanite” casting
- Hardened & ground dovetail guideways
- Hand scraped precision ways
- Hardened & ground table and ground table T-slots
- Precision ground ACME Leadscrews
- Chromed ground quill ( spindle )
- Chromed dials
- Adjustable ways
- Hand brake on mill head
- Tilting & rotating head
- Manual or automatic quill feeds 0.0015” , 0.003”, 0.006” per spindle revolution
- One shot lube system
- front and rear rubber chip guards
- (1) manual draw bar
- Tool box with tools
- Power source 220V , 3 phase
- One year industrial warranty for parts
Manual Knee Type Mills Specifications:
Specifications | GMM-949VPKGGMM-949V |
Table SizeTable Load Capacity | 9” x 49” 650 LBS |
X Axis TravelX travel with power feed Y Axis Travel Z Axis Travel | 35-1/2”31-1/2” 12” 17” |
Spindle Taper Type | R 8 |
AC Spindle Motor , | 3 HP |
Spindle speeds | 70-4,300 rpmVariable speeds |
Quill ( Spindle ) diameter | 3-3/8” |
Quill ( Spindle ) travel | 5” |
Ram travel | 12” |
Table T-slot size | 5/8” x 3 slots |
Head Swivel, R/H , L/H | 90 degree |
Net weight, LBS | 2,650 LBS |
Standard Equipment
- OEM DRO, 2 axis, installed for GMM-949VPKG only
- Table power feed X, installed for GMM-949VPKG only
- Way covers
- One draw bar
- One shot lube
- Tool box
Optional Equipment for Manual Knee Type Mills # GMM-949V
- DRO, NEWALL C80 # NW-949-2, 2 axis, free installation
- DRO, NEWALL C80,# NW-949-3, 3axis, 3rd on quill or columnfree installation
- DRO, SINO, # SINO-2, 2 axis , free installation
- DRO , SINO, # SINO-3, 3 axis , free installation
- Power air draw bar, High Quality( USA)# HQR8
- Coolant system
- Base coolant/chip drop pan# COOL-PAN
- Power feed # FP-180X, Taiwan ALIGN, x axis , free install
- Power feed # FP-180Y, Taiwan ALIGN, y axis, free install
- Power feed # FP-180Z, Taiwan ALIGN, Z axis, free install
- Halogen work light
- 6” vise, part# 900-0021
- 52 pcs clamping kit # # 900-0001, ½”-13NC stud, 5/8” T-slot
- 11 pcs R8 collets set # 900-0007, 1/8” – 7/8”
- Phase converter # PAM-300HD, USA, for single phase conversion
- Mill package # 3, incl 6” vise # 900-0021, collet set # 900-0007,
- Clamping Kit# 900-0001, 20pc Titanium end mill set # 8000-0020,
- 29pc Titanium drill bit set # 5000-0001T
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BASTONES - 2 LIJAS
PARTE: 2LO-FS-80B2 - LIJADORA DE BASTONES
- 2 LIJAS
NUEVA CON GARANTIASpecificationsSanding
Belt Drive Motor: 5HPDust
Sution Motor: 1/2HPSanding
Belt Size: 5" X 73”Applicable
Rod Diameter: Ø5-Ø80mmFeed
Speed (Variable): 1-20m/mmSanding
Belt Linear Speed: 1080m/mmNet
Weight: 450kgsGross
Weight: 530kgsMachine
Dimensions (L*W*H): 1050*850*1300mmPacking
Dimensions (L*W*H): 1120*920*1520mm
Design
and specifications are subject to change wi...
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
APILADOR DE TARIMAS - DESDE 30X30 PULG HASTA 50X48 PULG
PARTE: 2RT-010 -
APILADOR DE TARIMAS - DESDE 30X30 PULG HASTA 50X48 PULGNuevo con garantiaDesde 30" x 30"Hasta 50” largo Barrote x 48” anchoMaquina para tarimas de 3 y 4 barrotesMedidas especiales disponiblesCompletamente neumatica, no requiere electricidadLista para trabajarMaquinas practicamente libres de mantenimientoConstruidas de uso rudo para maxima produccion todos los diasHay mas de 240 maquinas en operacion hasta este diaMesa de rodillos patentadaEl operador no tiene que levantar ...
AMXmachinery
EXTRACTOR DE TUBO - DIAMETRO INTERNO 15-3/4” - MOTOR 3/4 HP
PARTE: AMX-10159 - EXTRACTOR DE TUBO - DIAMETRO INTERNO
15-3/4” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES
MOTOR 3/4 HP, 220/440V, 3 FASES,
1750 RPM, SIEMMENS
DIAMETRO INTERNO: 15-3/4”
DIAMETRO EXTERNO: 18”
MEDIDAS TOTALES: 25” LARGO X 13”
ANCHO X 18” ALTO
TODOS LOS 4 BALEROS NUEVOS