Identificador: 2630
Abierta
ID de articulo : # 2630 se ha agregado a su lista de deseos.
Descripción
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
USADA – BUENAS CONDICONES
FISHER+RUCKLE FZX-28 Delta
Veneer crossfeed splicing machine with pre-glued veneer sheets
Veneer strip length (in fiber direction) 750 - 2800 mm
Veneer strip width (cross to fiber direction) 70 - 600 mm
Veneer strip thickness (depending on veneer) 0.3 - 1.5 mm
EC standards
Year 2001
400V/50Hz
Complete of:
- INTERMEDIATE CONVEYOR
The intermediate conveyor serves at the same time as buffer to avoid dead times during the deposit procedure.
Veneer widths (cross to fiber direction) 300 - 2000 mm-
- VENEER FACES TRIMMING AND REINFORCEMENT UNIT
- STACKING STATION
The veneers are discharged and deposited smoothly, without any mechanical load.
Veneer widths (cross to fiber direction) 300 - 2000 mm
Delivery EXW
Transport Not included
Includes loading on truck
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SISTEMA DE PINTURA - MONTAJE EN PARED
SISTEMA DE PINTURA - MONTAJE EN PAREDSISTEMA PARA APLICACION EN MADERAAplicación de tintes, sellantes, lacas y capas finales para:• Muebles y armarios de madera• Ventanas y puertas de madera• Madera personalizada Uso de una amplia gama de tecnologías:• Convencional• HVLP (alto volumen a baja presión)• Compliant• Pulverización electrostática con aire MODELOS DISPONIBLES DE BOMBA, MANGUERAS Y PISTOLA MODELOS: • 289628 – con Pistola AirPro HVLP, boquilla de 1,0 mm (0,04...
AMXmachinery
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERS
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERSEn buenas condicionesModelo: 337-6RPRotary polisher has six (6) 1/2HP counter-rotating arbors with fladder-style abrasives.Rotation 12-35 RPM, 2HP variable feed 15-45 FPM on conveyor belt with vacuum bed. (Less vacuum pump unit).36” width capacity. Each arbor/spindle is 12”-long x 2”-diameter, arbor speed 100-1200 RPM, with LED readout on RPM. 0” – 6” motorized part thickness opening.Infeed and outfeed pinch rolls.Wired 460V...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
TRANSPORTADORES DE RODILLOS
PARTE: 11837 - TRANSPORTADORES DE RODILLO - LARGO 10 PIESEn muy buenas condicionesDistancia entre rodillos 3"Ancho total: 24"Diametro rodillos: 1.875"Altura de rieles: 3.5"Largo total: 120" (10 pies o 3 mts)Soportes para los transportadores disponibles