Identificador: 1734
Abierta
Descripción
PARTE: 2CK-P20HV
Has a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.
- Spiral Insert Knife Cutterhead with replaceable carbide insert knives for long life and smooth cutting action (132 inserts, 14mmx14mmx2mm)
- Sectional chip breakers
- Serrated sectional infeed roll conforms to material which is not yet flat
- Anti-kickback fingers for safe operation
- Available in single phase and 3-phase electrics
KEY ADVANTAGES
- 2-feed speeds
- Double bed rolls which are conveniently adjusted from the front of the machine to assist with planing difficult to feed material
- Side handwheel with linear scale for table adjustment
- Polyurethane outfeed roll which will not mark your material after it has been planed
- Flip open top lid with limit switch for safe & convenient changing of the insert knives
|
Maximum planing width |
20″ |
|
Maximum planing thickness |
8-5/8″ |
|
Feed speeds (2) |
20 & 30 FPM |
|
Main motor |
5 HP |
|
Cutterhead diameter |
3-1/8″ |
|
Min. length |
8″ |
|
Table rise & fall |
Manual |
|
Dust port (1) |
6” |
|
Net weight |
924 lbs. |
|
Machine dimensions (LxWxH) |
44” x 30” x 45” |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CANTEADORA SEMI AUTOMATICA
PARTE: 3HO-HT60A - CANTEADORA SEMI AUTOMATICABanding Tape Thickness0.4-3mmBanding Tape Width12-65mmWorkpiece Thickness10-60mmWorkpiece Length>=80mmWorkpiece Width>=50mmFeeding Speed12m/minGluing Motor0.55kwFeeding Motor1.5kwFine Trimming Motor0.75kw*2Polishing Motor0.18kw*2Air Pressure0.8MpaOverall Dimension2450*760*1350mmN.W.600kgs
AMXmachinery1
TRANSPORTADOR DE BANDA - MOTORIZADO AW
PARTE: 2CK-AW - TRANSPORTADOR DE BANDA - MOTORIZADO
Belt Width
BW
12″
15.75″
19.7″
23.6″
27.5″
31.4″
Machine Width
FW
13.4″
17.3″
21.25″
25.2″
29″
33″
Std. Material
Width (max.)
PW
9″
13″
17″
21″
24.8...
AMXmachinery1
SIERRA MULTIPLE - RODILLOS - PIEZAS CORTAS
PARTE: 2CK-131HMMAIN FRAME, MACHINE BED & ENCLOSURE1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head endAll Bedplates, Tables and Fences are Hard ChromedLift up sound and safety Enclosure including safety interlocks and good lightingDRIVE INCLUDESMaintenance free Full Cardan Shaft Drive to feedworks for balanced dr...
AMXmachinery1
MESA DE AIRE
PARTE: 2DO-TA-2 - MESA DE AIREIs designed for effortless handling of panels. Is typically
used to handle heavy loads without effort.Table dimensions: 3' x 5'9 self-releasing flotation outlets per square footEach outlet is self-locking by polyethylene ballsIncludes a built-in air flotation turbinePneumatic stroke up/down to lift panel to same working height than the edgebanderUp/Down stroke movement is triggered manually by operator on foot pedalPower and control components are installed into...