ID: 1734
Open
Description
PARTE: 2CK-P20HV
Has a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.
- Spiral Insert Knife Cutterhead with replaceable carbide insert knives for long life and smooth cutting action (132 inserts, 14mmx14mmx2mm)
- Sectional chip breakers
- Serrated sectional infeed roll conforms to material which is not yet flat
- Anti-kickback fingers for safe operation
- Available in single phase and 3-phase electrics
KEY ADVANTAGES
- 2-feed speeds
- Double bed rolls which are conveniently adjusted from the front of the machine to assist with planing difficult to feed material
- Side handwheel with linear scale for table adjustment
- Polyurethane outfeed roll which will not mark your material after it has been planed
- Flip open top lid with limit switch for safe & convenient changing of the insert knives
|
Maximum planing width |
20″ |
|
Maximum planing thickness |
8-5/8″ |
|
Feed speeds (2) |
20 & 30 FPM |
|
Main motor |
5 HP |
|
Cutterhead diameter |
3-1/8″ |
|
Min. length |
8″ |
|
Table rise & fall |
Manual |
|
Dust port (1) |
6” |
|
Net weight |
924 lbs. |
|
Machine dimensions (LxWxH) |
44” x 30” x 45” |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachinery1
EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBOR
PARTE: 1AM - EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBORDOS TAMAÑOS:VP-30: Aspa de 30″ de diámetroVP-42: Aspa de 42″ de diámetroCaracterísticas principales:*2 velocidades*Potente flujo de aire*30″ y 42″ de diámetro de aspa*Enchufe con borne de protección a tierra*127 volts*Llantas de plástico*Contiene 2 agarraderas, una en cada extremidad, para fácil movilidadUsos:*Ideales para usarse en talleres, bodegas y espacios exteriores.
Modelo
Potencia
WATTS
...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in ...
-500x500.png)
AMXmachinery1
MESA DE TRABAJO 39" X 16.5"
PARTE: 2MK-MA.1000 - MESA DE TRABAJO 39" X 16.5"The table is made of MDF with a work area of 39” x 16.5” and the rigid sheet structure can hold up to 441 Lbs. The convenient built-in drawer is ideal to store small accessories. It also comes with two sockets and 6.5 ft long extension cord, the retractable legs paired with wheels are super handy whenever moving or transporting it to different locations.Technical InformationDimensions39” x 16” x 33”Max. holding capacity441 Lbs.Weight48 Lb...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...