Identificador: 1302
Abierta
Descripción
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIA
One way feeding only
Work width: 250 mm (25 degrees), 55 mm (60 degrees)
Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variable
Feed speed: 88 m/min (60hz), 73 m/min (50hz)
Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw
2 knife stocks on top and bottom surfaces
Knife type: Changing blade type
Knife size: 335 length x 66 x 8 mm
Accessories: Changing blades and standard tools
Machine size: (WxLxH): 940 x 1920 x 1405 mm
Net Weight : 1,080 Kg
Packing size: (WxLxH): 1200 x 2150 x 1750 mm, G/W: 1,350 kg
Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3EA -TS300K - ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
PARTE: 3EA -TS300K -
ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
Nueva con garantíaFeaturesMax.keyway width per cut :16mmMax. stroke : 300mmNo. of stroke per minute: 8 steps(Low: 22,26, 31, 39spm ; High :44,52,61,78 spm)- Spindle motor : 5HP (4P/8P)- Working table : Dia. 560mm- Inner hole dia. of table : Dia. 75mmStandard Accessories1. Lubrication system2. Rotary table3. Tool box & tools4. Rubber chip cover (4pcs/set)5. Chip box Optional Accessories2. SK-9 Strong 3 Jaw scroll chuck 1PC...
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES
AMXmachinery
TRANSPORTADOR RODILLOS - CURVOS - RODILLOS METALICOS
PARTE: 12343-3 - TRANSPORTADOR RODILLOS -
CURVOS - RODILLOS METALICOS
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.