Identificador: 1302
Abierta
ID de articulo : # 1302 se ha agregado a su lista de deseos.
Descripción
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIA
One way feeding only
Work width: 250 mm (25 degrees), 55 mm (60 degrees)
Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variable
Feed speed: 88 m/min (60hz), 73 m/min (50hz)
Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw
2 knife stocks on top and bottom surfaces
Knife type: Changing blade type
Knife size: 335 length x 66 x 8 mm
Accessories: Changing blades and standard tools
Machine size: (WxLxH): 940 x 1920 x 1405 mm
Net Weight : 1,080 Kg
Packing size: (WxLxH): 1200 x 2150 x 1750 mm, G/W: 1,350 kg
Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COLECTOR DE POLVOS 5 HP
PARTE: 1SL-DC-DC2045 - COLECTOR DE POLVOS 5 HPNUEVO CON GARANTIAMOTOR: 5 HP, 220V, 3 FASES, 60 HZCAPACIDAD DE SUCCION: 2,500 CFMNUMERO DE BOLSAS Y FILTROS: 2PESO: 80 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
CEPILLO MOLDURADOR 13" ANCHO
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHONUEVO CON GARANTIAMOTOR: 1.5 HP, 220V, 60 Hz, MONOFASICOTAMANO DE LA MESA: 18" X 14"CAPACIDAD DE CORTE: 13" X 6"MAX. PROFUNDIDAD DE CORTE: * 1/8" PARA TABLAS HASTA 5-1/2"13" * 1/16" PARA TABLAS MAYORES A 5-1/2"VELOCIDAD DE CABEZAL: 5000 RPMVELOCIDAD DE ALIMENTACION MOLDURADOR: 12 PIES/MINCAPACIDAD DE ANCHO EN MOLDURADOR: 2-1/2" A 6"DIMENSIONES MAQUINA: 44" ALTO X 24" ANCHO X 36" FONDOPESO: 120 KGSTIPO DE EMPAQUE: 2 CAJAS* L...
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...