Identificador: 1582
Abierta
Descripción
PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES
460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min.)
- “Carpet” style
feed system with 1,500 spring loaded spikes
- 2 HP 4-column
feed carpet/top-head elevation motor
- (3) bottom &
(3) top powered feed rollers & (4) bottom & (1) top idle feed rollers
- Digital thickness
setting controls with cutterhead motor amp meters
- 34” pass-line
height
- (1) automatic
& (1) manual oiler, (low oil shut-off)
- (4) 6” diameter
dust ports, (~6,000 CFM)
- 90 PSI pneumatic
requirement, (3/8'' diameter inlet)
- 75 dB sound rating
- 115” L x 88” W x
70” H approximate overall dimensions
- Weighs
approximately 15,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MAQUINA FORJADORA ELECTRICA
PARTE # 1EF-002 - MAQUINA FORJADORA ELECTRICA CON MUELAS DE ACERO Maquina forjadora para la elaboración de escoba de fibra de mijo y otras fibrassintéticas y naturales y elaboración de trapeador. Capacidad de produccion: 60 docenas por turno. Corriente electrica:220V, 3 fases220V, 2 fases110V, 1 fase Peso total: 165 kg Dimensiones: 1.20 x 1.20 x 1.20 mts
AMXmachinery
PART: 12633 – TEMPLATE MAKER - ISEL-AUTOMATION
PART: 12633 – TEMPLATE MAKER -
ISEL-AUTOMATION
Used - Mechanically the machine is like new -
Sold as is
It is complete and worked well
until we stopped using it many years ago.
Don't have the software for it so
we can’t currently run it.
As I mentioned, it is a project,
and you would need to track down software and a computer to connect to.
Mechanically the machine is like
new.
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
LIJADORA PARA CURVOS Y RECTOS BRUSA LT-80
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOSMARCA: BRUSAMODELO: LT-80PARA PULIR- PALO DE ESCOBA- REDONDOS- MANGO DE HERRAMIENTA- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm