Identificador: 1582
Abierta
ID de articulo : # 1582 se ha agregado a su lista de deseos.
Descripción
PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES
460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min.)
- “Carpet” style
feed system with 1,500 spring loaded spikes
- 2 HP 4-column
feed carpet/top-head elevation motor
- (3) bottom &
(3) top powered feed rollers & (4) bottom & (1) top idle feed rollers
- Digital thickness
setting controls with cutterhead motor amp meters
- 34” pass-line
height
- (1) automatic
& (1) manual oiler, (low oil shut-off)
- (4) 6” diameter
dust ports, (~6,000 CFM)
- 90 PSI pneumatic
requirement, (3/8'' diameter inlet)
- 75 dB sound rating
- 115” L x 88” W x
70” H approximate overall dimensions
- Weighs
approximately 15,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESACADORA DE TARIMAS 1 RESAQUE
PARTE # NC1-1400-2 - RESACADORA PARA TARIMAS - 1 RESAQUENueva con garantiaMotor 10 HP, 220V, 3 fasesCapacidad: palos mínimo 30”, no máximoTamaño de resaque: Medida Estándar de 0 a 3” ancho x 9” largoCabezal con navajas fijas y helicoidales300 - 400 resaques por horaBotón de paro de emergenciaMedidas maquina: 48" largo x 36" fondo x 45" altoPeso aproximado: 375 KgMaquina para uso rudo industrial
AMXmachinery
PARTE: 12645 - SISTEMA FINGER JOINT - INDUSTRIAL - FJS-25
PARTE: 12645 - SISTEMA FINGER JOINT - INDUSTRIAL - FJS-25USADA - BUENAS
CONDICIONESINCLUYE4 Troceros neumáticos
con escalera de rodillos 16 pies de largoAditamento para
pegar 18 pies de largoAfiladora y Alineador
de cuchilla
Cabezales y Serruchos
igualadores
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...