Identificador: 1575
Abierta
Descripción
PARTE: 12328 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO
USADO - BUENAS CONDICIONES
Features gang rip and side head capabilities.
Additional technical specifications include...
Planing & sawing width 24" max
Thickness max. 4"
Min. 1/2"
Top Head: 4 knives 1/8" x 1-1/4" x 25"
18 HP motor
Speed 5500 RPM
5-1/4" cutting circle
3/8" max chip removal
7/8" profile depth max.
8" dia. dust hood
Bottom Head: 4 knives
1/8" x 1-1/4" x 25"
12 HP motor
5500 RPM
5-1/4" cutting circle
3/8" max. chip removal
1/2" max. profile depth
7" dia. dust hood
Feed System: infinitely variable 20-100'/minute
4 HP motor
11 feed rolls
9 powered rolls
6-5/16" dia. of top rolls
3-7/8" dia. of bottom rolls
length of infeed table 37"
shortest work piece 16"
floor area 120" x 60"
460V three phase
Shipping dimensions 12' x 5' x 6' High
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO
AMXmachinery
ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
PARTE: 12128
- ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY
BUENAS CONDICIONES - REACONDICIONADA
Width
Capacity: 68"
Grooved,
Rubber-Covered Applicator Rolls
Applicator
Roll Diameters: 7.75"
Main Motor:
1.5 HP, 208-230/460v, 3ph
Hard
Rubber-Covered Doctor Rolls
Top-Elevator
Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical
Digital Readout for Thickness
Currently
460v, 3ph (Ask about Voltage Change)
-500x500.jpg)
AMXmachinery
SANDER QUICKWOOD ELITE PRO1100
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100Machine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)* ACOUSTIC INSULATION...THIS SAN...
AMXmachinery
RESACADORA DE TARIMAS 1 RESAQUE
PARTE # NC1-1400-2 - RESACADORA PARA TARIMAS - 1 RESAQUENueva con garantiaMotor 10 HP, 220V, 3 fasesCapacidad: palos mínimo 30”, no máximoTamaño de resaque: Medida Estándar de 0 a 3” ancho x 9” largoCabezal con navajas fijas y helicoidales300 - 400 resaques por horaBotón de paro de emergenciaMedidas maquina: 48" largo x 36" fondo x 45" altoPeso aproximado: 375 KgMaquina para uso rudo industrial