Identificador: 1299
Abierta
.jpg)
REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
AMXmachinery
Descripción
PARTE: 2FA-RM6X6-4 - REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
NUEVA CON GARANTIA
- ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Powered Belt Return w/ Adjustable Height Sheer Plate
- Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min)
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 70” L, 93” W, 47” H
- Approx. Weight: 1840 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
PWR_HD_6X6
- Top Mounted Powered Tire Hold Down Wheel
HYD_KIT
6 x 6 RESAW HYD COMPONENTS
(3) - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Self- contained Hydraulic System Runs off First Saw
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 60” L, 90” W, 48” H
- Approx. Weight: 1340 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
HD_SLAVE
- Top Mounted Powered Tire Hold Down Wheel
PWR_HD_HYD KIT
RS6X8 HYD KIT
AIR_HOLD_OVER_SLAVE
RESAW HOLD-OVER KIT FOR SLAVE MODEL
FRAME 6X6_MID
Slave Middle for 6x6 Return Resaw
FRAME_6X8_MID
Slave Mid Frame Rail for Behind 6X8
FRAME_6X8_END
Slave End Frame to Slave Middle or RM6X8
RESAW-(4)15HP_480_PUMP
4 HEAD Control Panel
- (4) 15 HP Blade Motors (230/480/3/60 TEFC)
- (1) 5 HP Pump Motor (230/480/3/60 TEFC)
- 480V Line Voltage
- 24" Tall X 20" Wide Enclosure (UL Type 1,3R,4,12)
- Enclosure Mounted to Hydraulic Pump Stand
- 480V Primary/ 120V Secondary Control Transformer
- Service disconnect in panel door
- (4) 15HP 480V Motor starters, breaker w/OL
- (5) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2, Head 3, Head
4, Hydraulic Pump)
- (1) Emergency Stop Button w/ legend plate
- All controls mounted in plastic remote enclosure
- Completely for 480V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit
Overload Protection
- Controls Mounted at Operators Station
- 85.8 FLA
4 HEAD HYD
4 Head Resaw Pump System
- 40 Gallon Hydraulic Revivor
- 10 GPM Pump
- Pump Stand
STARTUP KIT 1
- 25 Blades
- Extra Set of Guides
- Grease gun with tube of grease
- 9/16 Wrench
- 3/4 Wrench
- 1-1/8 Wrench
- Toolbox
Popular Options
- Multiple Support Heads
- Air Tension Hold Over Plate (For Ripping Material)
- Pre-wired for 230, 480, 575V 3 Phase
- Pre-wired 220V 10HP Motor Single Phase
- Gas Powered Honda GX690 Power Plant
- 6” Height Right Side Fences
- Left Fences for Ripping
*** Other options available
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA BANDA ANCHA – 2 LIJAS SUPERIORES - 46” ANCHO - COSTA
PARTE: 12349 - LIJADORA BANDA ANCHA – 2 LIJAS SUPERIORES - 46” ANCHO - COSTA
USADA - BUENAS CONDICIONESCOSTA
MOD. 60 CT 1 1150roller
padworking
width mm. 1150hp
17, kw 12
CE rules (year 1996
AMXmachinery
PARTE: AMX-10087 - VENTILADORES DE PARED - 4 ASPAS DE 22” A 30” DIAMETRO
PARTE: AMX-10087 - VENTILADORES DE PARED - 4 ASPAS DE 22”
A 30” DIAMETRO
AMX-10087-1
= 1 PIEZA - ASPAS 22” DIAMETRO - MOTOR CERRADO
AMX-10087-2
= 1 PIEZA - ASPAS 28” DIAMETRO - MOTOR ABIERTO
AMX-10087-3
= 1 PIEZA - ASPAS 28” DIAMETRO - MOTOR CERRADO
AMX-10087-4
= 1 PIEZA - ASPAS 29-3/4” DIAMETRO - MOTOR CERRADO
AMX-10087-5
= 1 PIEZA - ASPAS 30” DIAMETRO - MOTOR ABIERTO
USADO - BUENAS CONDICIONES
MOTORES 1-1/2 HP, 2 HP, 208V, 220V,
230/460V, 3 FASES9 ...
AMXmachinery
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA
AMXmachinery
PARTE: 2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCION
PARTE:
2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCIONNUEVA CON GARANTIACon la maquina viene incluido:(1) 7mm Nail Head(1) 10mm Nail Head(1) 12mm Nail Head(1) Single Vertical Positive Placement Clamp(1) Single Metal Pressure Plate(1) Magnetic Support for Vertical Placement
Clamp(1) Blue Rubber Pads (SW)(1) Yellow Rubber Pads (MW)(1) Black Rubber Pads (HW)(...