Identificador: 108
Abierta
Descripción
CINTURONES DE REPUESTO PARA BOLSAS DE COLECTORES DE ASERRIN
COLECTOR 1 HP
R-2041-CLAMP - CINTURON PARA BOLSA DE COLECTOR 2041
COLECTOR 2 HP, 3 HP Y 5 HP
R-2042-34 - CINTURON PARA BOLSA DE COLECTOR 2042-2043-2045
COLECTOR 7 HP
R-2047-CLAMP - CINTURON PARA BOLSA DE COLECTOR 2047
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
PARTE: 3SW-
HBR-300 - REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
NUEVA CON GARANTIASpecificationsMaximum Material Size (W X H): 12"x 12
"(300x300 mm)Distance From Blade To Conveyor: 5/64"~10-5/8"(2~270mm)Minimum Cut Piece: 2mmSaw Wheel Diameter: 28" x2(700mm x2)Sawblade Length: 196"(4980~4990mm)Sawblade Width: 2" OPTION 3"(50mm
OPTION 75mm)Conveyor Belt Sizes(Wxl): 270 x 4200mmSawblade Speed: 25.4m/sFeed Motor: 1HP WITH INVERTERFeed Conveyor Tilt: 0~30 DEGREEFeed Speed (Variable): 0~1...
AMXmachinery
ASERRADERO PORTATIL WOODMIZER LT15
PARTE # 10401 - ASERRADERO PORTATIL WOODMIZER LT15EN BUENAS CONDICIONES DE OPERACION
AMXmachinery
PARTE: 12387 - COLECTOR DE ASERRIN - DONALDSON TORIT
PARTE:
12387 - COLECTOR DE ASERRIN - DONALDSON TORIT
USADO - BUENAS CONDICIONESThe dust collector Filter Area
has an estimated up to 8,128 sq.ft. of filtration surface area with (32)
cartridge filters, estimated 8,100-20,300 cfm, 16 valves, a square design with
a rotary airlock discharge. Disassembled parts overall sizes: Dust
Collector-Overall Size 88"W (with fittings) x 84"D x 118"H (with
fittings), Legs Overall Size 86"W x 185"H, Manifold Overall Size
80"W x 19"D x 35"H, Pyrami...