Identificador: 1938
Abierta
Descripción
PARTE: 12380 - CNC TALADRO, ENGOMA, INSERTA – PILLAR
USADA – MUY BUENAS CONDICIONES
Clamps working, software, stops and such in operating condition.
This machine has Windows 7 installed and the electrical cabinet is cleaned out in addition.
The dowel inserter has been serviced and works correctly.
Been completely gone thru and serviced, with manuals.
Machine is 100%
2016 model year
PILLAR H-49
Machine Has Been Fully Serviced
New Injector Service Kit Installed
49" work field
2 Zones
X Axis CNC control for positioning
4 clamp Hold-downs
Glue injecting system (injects glue or water)
1 HP High Frequency 18,000 RPM Direct Drive Spindle
12" Diameter vibratory dowel bowl mounted above machine (holds 800 dowels)
10" Industrial Color Touchscreen PC for programming and running programs
Digital Mechanical readouts for height and depth
1/2" Thick Machined Aluminum Work Surface
Windows 7 Operating System
Shipping Footprint: 72 (length) x 50 (width) x 84 (height)
Weight: 2500 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
GUILLOTINA DOBLE HOJA
PARTE # 11931 - GUILLOTINA DOBLE HOJA - MONGUZZIMod. TRM 2L 2.600Capacidad de corte 2.700 mm.Ancho máx de corte 520 mm.Ordenador de corte con 99 programasNormas CEAño 2001
AMXmachinery
PARTE: 3CH-XBJ-630 - BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1500 KG/HR
PARTE: 3CH-XBJ-630 - BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1500 KG/HRNueva con garantíaAlimentación automáticaLas briqueteadoras de metal pueden compactar diferentes clases de materiales como hierro fundido, aluminio, cobre, magnesio, titanio, molibdeno, metal, etc., en bloques de alta densidad sin aditivos.Specifications:Main cylinder: Nominal force 630 kNFeed cylinder: Nominal force 235 kN Block cylinder: Nominal force 785 kNBriquette size: 160 mmBriquette density: Steel...
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO