Identificador: 2848
Abierta
Descripción
PARTE: 12683 - LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 53” ANCHO
BUTFERING
Usada en buenas condiciones
Width capacity 1,350mm (53")
Work Piece Thickness: 3mm to 160mm (1/8" to 6")
Abrasive Belt Size: 1,370mm (53") x 2,620mm (103")
Variable Feed Vacuum Feed Belt: 2.5 to 13 m/min (8 to 42 ft/min)
Vacuum Motor: 7.5 HP
1st Head: Steel Profiled Contact Roller, 30 HP
2nd Head: Rubber Profiled Contact Roller, 20 HP
3rd Head: Combination Head, Contact Roller & Air Cushion Sanding Pad/Platen, 20 HP
Constant-Passline Machine
Voltage: 460 Volts, 3 Phase
Full Load Amps: 150 FLA at 460 Volts
Compressed Air: 55 cfm @ 90 PSI Required
Total CFM Required 5,365
Serial #: 0-256-03-1821
New in 2015
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
MOLDURADORA 9" ANCHO
PARTE # 2TA-SM-236C - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-236U - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-237U - MOLDURADORA - 9" ANCHO, 7 CABEZALESNueva con garantiaFeatures:Hard chrome plated table for maximum wear resistance.Fully enclosed safety guard reduces noise and completely prevents chips splashing.Anti-impact plate for over-width and over-thickness protection.Oversized top and bottom rollers run synchronized, ensuring smooth feeding.FRP plastic steel safet...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 254 LITROS
PARTE:
2PG-DRAGON24 – HORNO PARA CERAMICA, VIDRIO, METALES – 254
LITROSNuevo con garantíaMax. Temperatura: 1287 grados centígrados16500 Watts, 69 Amps
Medidas interiores: 610 mm ancho x 610 mm fondo x 686 mm
altoPotters who struggle with top-loading kilns will enjoy the Dragon. The door
swings open 160 degrees on a heavy ¾” steel rod with sealed bearings. Two
spring-loaded latches press the door tightly closed.Quick to
loadIf you
fire ware that is similar in size from ...
AMXmachinery
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 36” ANCHO
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 1 LIJA - 36” ANCHO
Usada
Motor principal: 5 HP, conectada 440V, 3 fases
Motor avance: 1.5 HP, conectada 440V, 3 fases
AMXmachinery
SLICER - REBANADORA - 8 PIES DE LARGO
PARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGO
8 - SLICER
(REBANADORA) PARA CORTE DE .5 MM HASTA
6MM MARCA IND. G.H. PARA CORTE DE MADRA DE 8 PIES HASTA 18 PULGADAS DE
ANCHO