ID: 1747
Open
.jpg)
.jpg)
Description
PARTE: 2CK-UFO103B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 5 HP generating 2863 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- Magnetic starter included
KEY ADVANTAGES
- 5HP Motor
- 2863 CFM
- 7” main inlet with removable outlet with (4) 4” ports
|
CFM |
2863 CFM |
|
Motor |
5 HP |
|
Main inlet diameter |
7″ |
|
Connector inlet diameter |
(4) 4″ |
|
Bag Volume |
20.97 cubic feet |
|
Static pressure of water |
10.55 inch |
|
Top bags (2) |
24″ x 42” |
|
Bottom bags (2) |
24″ x 42” |
|
Net weight |
253 lbs |
|
Noise Level |
85dB |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery1
SIERRA CINTA 37" - 2 EN 1 - 10HP
PARTE: 2CK-HB950A - SIERRA CINTA 37" - 2 EN 1 - 10HP Is a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it ca...
AMXmachinery1
TAPADERA PARA TUBO
PARTE: 2EX-DA-EC04 - TAPADERA PARA TUBODust collection end caps are used to close off raw ends of ductwork pipe or fittings.
-500x500.png)
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1
PARTE: 2CK-HB600A - SIERRA CINTA 24" - 2 EN 1 Is heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that ...
AMXmachinery1
SIERRA DE VAIVEN - 200 MM
PARTE: 2CK-FR-200 - SIERRA DE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
200 mm
Min.
Working Thickness
...