Identificador: 2343
Abierta
.PNG)
Descripción
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15
Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in to your larger waste bin. A pneumatic lever is used to lift the sleeves connecting the system to the dump bin which saves time and effort.
- 15 HP blower motor generating 5000 CFM @ 10.3” WC
- Low RPM blower (1750 RPM) generating only 81 dB
- Convenient self-dumping bin with 168-gallon capacity
- Compact design is ideal for a small to mid sized shop looking for a stand alone or a larger shop looking to add a secondary dust system.
- High efficiency 15HP TEFC motor
- Heavy gauge steel construction for long durability
- Self dumping bin allows operator to quickly, safely, and conveniently dispose of wood waste
- 16” main inlet diameter
- Pneumatic raising / lowering of dust sleeves to connect system with dump bin for added convenience
- High efficiency 1-micron filter bags (36 pcs)
- Manual shaker system for cleaning of filter bags
- Magnetic starter included
- Dust collector comes disassembled
Blower motor | 15 HP |
CFM Capacity | 5000 CFM @ 10.3” WC |
Filter information | 1 Micron Filter Bags: 8” dia. x 63” long x 36 pcs |
Filtration surface (sq.ft) | 394 sq. ft |
Inlet diameter | 16” |
Sound rating (Decibel) | 81 dB |
Disposal capacity | 168 gallons |
Machine dimensions (LxWxH) | 135” x 42.5” x 122” |
Shipping dimensions | Blower = 46” x 43” x 37” @ 748 lbsFrame / Bin / Accessories = 99” x 46” x 49” @ 1056 lbs |
Electrical information | 230/3/60 @ 42 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA POSTERIOR
PARTE: 2CK-R18Is designed with performance and added safety in mind. Cutting from below forces the workpiece down on to the feed chain for superior hold down. In addition the blade can project up above the workpiece to allow the gullet to clear the chips which leads to less heat buildup resulting in longer blade life and improved cut quality. Is capable of producing a glue joint cut up to 12 feet. The user friendly floating fence allows the operator to easily line up the material for opt...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE; 2PI-HPMT - ESPIGADORA HORIZONTAL Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 10' X 10 GA
CORTADORA DE METAL HIDRAULICA 10' X 10 GA PARTE: 2GM-HS-1010MISO 9001 certifiedTaiwan machinesHS-1010M comes with 24” manual back gauge, one side handwheel operate )adjustment 0.004” , inch/mm digital displayQuick Change Blade Gap Adjustment (BGA), with gap dialShadow line for accurate straight cutting60” squaring arm with inlaid inch/metric dual scaleCE standard “OMERO” electric control systemMeet OSHA safety standard codeAdjustable cutting length and s...
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...