Identificador: 3233
Abierta
Descripción
PARTE: 2EX-DCY-1425 - COLECTOR DE POLVOS - 25 HP - CICLON
Features a powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions. This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste. Is a 3-phase outdoor cyclone dust collector equipped with 25 horsepower and 10500 CFM. Electronic controls must be protected from weather. Magnetic starter included.
|
|
|
15HP 3PH Outdoor Cyclone Dust Collector with Optional High Capacity Rotary Airlock
|
20HP Outdoor Cyclone Dust Collector |
|
|
Amps
|
62A @ 230V 31A @ 460V |
37A @ 230V 19A @ 460V |
49A @ 230V 25A @ 460V |
|
|
Cfm
|
10500 |
7600 |
8800 |
|
|
Chip dumping capacity
|
10 CFM |
10 CFM |
10 CFM |
|
|
Dimensions
|
25′1″ x 153.5″ x 98.5″ |
16′-3″ x 73.25″ x 73.25″ |
23′-11″ x 153.5″ x 98.5″ |
|
|
Drop size
|
8" x 12" |
8" x 12" |
8" X 12" |
|
|
Horsepower
|
25HP |
15HP |
20HP |
|
|
Inlet-size
|
18" |
14" |
16" |
|
|
Outlet size
|
20" |
16" |
18" |
|
|
Rotary airlock hp
|
1/4 HP |
1/4 HP |
1/4 HP |
|
|
Soft start
|
Yes |
Yes |
Yes |
|
|
Weight
|
2850 lbs |
2000 lbs |
2500 lbs |
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - 3 SECCIONES
PARTE: 2EX-DCF-327 - EXTRACTOR DE POLVOS - FILTRO - 3 SECCIONESTyphoon offers 3 sections baghouse sock filter in open or enclosed models. Both of these models have 9 filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.
-500x500.jpg)
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL Y VERTICAL
PARTE: 2PI-HPJV - ESPIGADORA HORIZONTAL Y VERTICALIs a Horizontal and Vertical Bore and Dowel insertion CNC machining center used for case construction in cabinet and/or furniture manufacturing. One of the best bore drilling machines available.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling