ID: 3233
Open
Description
PARTE: 2EX-DCY-1425 - COLECTOR DE POLVOS - 25 HP - CICLON
Features a powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions. This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste. Is a 3-phase outdoor cyclone dust collector equipped with 25 horsepower and 10500 CFM. Electronic controls must be protected from weather. Magnetic starter included.
|
|
|
15HP 3PH Outdoor Cyclone Dust Collector with Optional High Capacity Rotary Airlock
|
20HP Outdoor Cyclone Dust Collector |
|
|
Amps
|
62A @ 230V 31A @ 460V |
37A @ 230V 19A @ 460V |
49A @ 230V 25A @ 460V |
|
|
Cfm
|
10500 |
7600 |
8800 |
|
|
Chip dumping capacity
|
10 CFM |
10 CFM |
10 CFM |
|
|
Dimensions
|
25′1″ x 153.5″ x 98.5″ |
16′-3″ x 73.25″ x 73.25″ |
23′-11″ x 153.5″ x 98.5″ |
|
|
Drop size
|
8" x 12" |
8" x 12" |
8" X 12" |
|
|
Horsepower
|
25HP |
15HP |
20HP |
|
|
Inlet-size
|
18" |
14" |
16" |
|
|
Outlet size
|
20" |
16" |
18" |
|
|
Rotary airlock hp
|
1/4 HP |
1/4 HP |
1/4 HP |
|
|
Soft start
|
Yes |
Yes |
Yes |
|
|
Weight
|
2850 lbs |
2000 lbs |
2500 lbs |
|
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
ESCOPLO HORIZONTAL - OSCILANTE - 2 MESAS
PARTE: 2CK-SW-02 - ESCOPLO HORIZONTAL - OSCILANTE - 2 MESAS Is a dual table mortising machine capable of producing horizontal or bevel mortises up to 4.72” long x 1.18” high x 3.15” deep. The dual table setup permits two operators to work simultaneously for higher throughput and increased productivity. The mortise size is adjustable to your needs and the tables can be adjusted in height to easily locate the mortise precisely for tight and flush joints. A pneumatic clamp holds the work...
-500x500.png)
AMXmachinery1
TORNO 26 x 160''
TORNO 26 x 160'' PARTE:2GM-GML-26160Heavy Duty Precision Gap Bed Lathe 26” x 160”, 4-1/8” Bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 15HP16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle i...
AMXmachinery1
ALIMENTADOR - 4 RUEDAS - VELOCIDAD VARIABLE
PARTE: 2CK-DC40 - ALIMENTADOR - 4 RUEDAS - VELOCIDAD VARIABLE Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a hor...
-500x500.png)
AMXmachinery1
FRENO PARA DOBLADORA DE METAL
FRENO PARA DOBLADORA DE METAL PARYE: 2GM-SB-1014ISO 9002 certifiedLarge 3” beam opening, adjustable1” beam adjustment (front and back)Stop rods for repeat bends(2) counter weightsAll steel heavy body construction with extra heavy tie rod for minimum deflectionBending Capacity: Mild Steel14 Ga.Bending Capacity: Stainless Steel18 Ga.Bending Length Capacity10'Bending Angle Degree0-135°Beam adjustment, front and back1"Minimum reverse bend5/16"Manual clampingSt...