Identificador: 3227
Abierta
Descripción
PARTE: 2EX- DC-275 - COLECTOR DE POLVOS - 3 - CICLON
Comes in single and three phase models with 2 1-micron filter bags. It features a 117 square foot filter area with 24 cubic feet of storage capacity measuring 140 inches tall by 120 inches wide by 50 inches deep. The single-phase dust collector is powered by a 3 horsepower Baldor motor has 38 amps at 220 volts while the three-phase dust collector is powered by a 3 horsepower TEFC motor has 20 amps at 220 volts. Drums not included. Magnetic starter included.
|
|
|
3HP 1PH Cyclone Dust Collector, 230V
|
5HP 3PH Cyclone Dust Collector
|
7.5HP 3PH Cyclone Dust Collector
|
|
Amps
|
27A @ 220V |
15A @ 220V |
1PH: 27A @ 220V 3PH: 17A @ 220V |
1PH: 38A @ 220V 3PH: 20A @ 220V |
|
Cfm
|
6400 |
1785 |
2975 |
4850 |
|
Dimensions
|
148″ x 128″ x 56″ |
123″ x 65″ x 42″ |
140″ x 110″ x 50″ |
140" x 120" x 50" |
|
Dual barrel design
|
true |
— |
— |
— |
|
Fan rpm
|
3450 |
3450 |
3450 |
3450 |
|
Fan size
|
16" |
13″ |
14.25″ |
14.75" |
|
Filter-bags
|
2 |
1 |
2 |
2 |
|
Filter area
|
117 |
37 |
59 |
117 |
|
Horsepower
|
10HP |
3HP |
5HP |
7.5HP |
|
Impeller size
|
16" |
13″ |
14-1/4″ |
14.75" |
|
Inlet-size
|
13" |
8″ |
10" |
12" |
|
Motor
|
TEFC 10 HP |
TEFC 3 HP |
1PH: BALDOR 5 HP 3PH: TEFC 5 HP |
1PH: BALDOR 7.5 HP 3PH: TEFC 7.5 HP |
|
Phase
|
3 |
1 |
1 or 3 |
1 or 3 |
|
Static pressure
|
16" |
10″ |
12″ |
13.5" |
|
Storage capacity
|
32 |
12.78 |
11 |
24 |
|
Weight
|
750 lbs |
260 lbs |
440 lbs |
540 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS
COLECTOR DE POLVOS PARTE: 2GM-WDC-2100Our wet dust collector system offers safe and efficient method for collecting hazardous dust particles cause by grinding, sanding, or cutting metals. If you’re in the market for a stainless steel wet dust collector that helps eliminate hazardous matter from your machine shop that is created by either a grinding, sanding, or a cutting process, then look no further. Call us today to better understand your process/application and pr...
-500x500.png)
AMXmachinery1
CEPILLO 2 CARAS - 25" ANCHO
PARTE: 2EX-SXP-225 - CEPILLO 2 CARAS - 25" ANCHODetails: Has a feed speed of 20-130 ft/min., a shaftdrive system, segmented feed rollers, 12 sets of feed rollers, jointer style infeed, patented top and bottom Super Slide out cutterheads, pneumatically loaded hold down rolls, a hard chrome plated bed, optinal long infeed table, disc brakes, massive four post elevation system and is available with Vector, Stealth, Mach or Straight Knife cutterheads.Patented top and bottom Super Slide slide out c...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 10'6'' x 22
DOBLADORA DE METAL 10'6'' x 22 PARTE: 2GM-SBB1022Machine Tools 10-foot Siding Brakes are a portable, foldable solution designed for precision sheet metal bending in roofing and HVAC applications. Built with a heavy welded snap steel stand for stability, this tool ensures durability and reliability on any job site. Featuring a cut-off shear for clean, accurate cuts, it’s the ideal companion for roofers and HVAC professionals seeking efficiency and precisio...
-500x500.png)
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R450V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assem...