Identificador: 2340
Abierta
.PNG)
.PNG)
.jpg)
Descripción
COLECTOR DE POLVOS - 5HP - 2CK-UFO103B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- HP generating 2863 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- Magnetic starter included
- 5HP Motor
- 2863 CFM
- 7” main inlet with removable outlet with (4) 4” ports
CFM | 2863 CFM |
Motor | 5 HP |
Main inlet diameter | 7″ |
Connector inlet diameter | (4) 4″ |
Bag Volume | 20.97 cubic feet |
Static pressure of water | 10.55 inch |
Top bags (2) | 24″ x 42″ |
Bottom bags (2) | 24″ x 42″ |
Net weight | 253 lbs |
Shipping weight | 363 lbs |
Shipping dimensions | 57″ x 30″ x 31″ |
Noise Level | 85dB |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA 63'' x 85'' 40 HP
LIJADORA 63'' x 85'' 40 HP PARTE: 2GM-FP-6385Abrasive belt size: 63” x 85” 10” diameter heavy duty drum for perfect graining3-1/8” wide openingMotorized Table Lift with LED displayVariable Speed ConveyorConveyor Forward & ReverseBelt Safety Overtravel SwitchesElectronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) toRe-adjust the tracking system when running extremely out of parallel belts4-Jackscrew Table SupportDouble Infeed & Outfeed P...
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX340M - ENCHAPADORA DE CANTOS - 23 FPM - 0.3 - 3 MM - AUTOMATICA
PARTE: 2CK-MX340M - ENCHAPADORA DE CANTOS - 23 FPM - 0.3 - 3 MM - AUTOMATICA Perfect blend of quality and affordability. With fine attention to detail and quality componentry can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the id...
-500x500.png)
AMXmachinery1
TRANSPORTADOR DE RETORNO
PARTE: 2DO-BT3 - TRANSPORTADOR DE RETORNO1 Edge bander + 1 Return Conveyor = 1 fully productive operator, a
streamlined workflow, less handling damage, less rejects… Unlike their human counterpart, an automated
system needs no hiring, no training, does not take off sick and works extended
hours without receiving extra money. This is true for all Return Conveyors
installed on shaper/sanders, single end tenoners, planers and wide belt
sanders.Operating Principle: Its receiving rollers ar...