Identificador: 2354
Abierta
ID de articulo : # 2354 se ha agregado a su lista de deseos.
Descripción
SIERRA MULTIPLE 50/60 HP 2CK-MRS350
- The Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with Heavy Guided Chain. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel 55mm dia. Saw Arbor with 70 mm OD with dble. keyed Quick Removal Sleeve
- Powered Rise & Fall to the Pressure Rollers
- New style round Fence Bar support with Quick-Shift Long Fence
- Long Infeed Fence with Heavy Round Bar for mounting for control of long material (not shown in picture above)
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow-soft speed start) and low voltage controls
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Overload Protection System for feed motor. The feed chain slows down automatically when the saws are overloaded. This prevents damage to the material and machine. It also prolongs saw life.
- Comes with 1 set of spacers and removable saw sleeve
- C.E style European Guard & Safety Features
- Electrics are 230, 460 or 575 Volts 3 phase 60 cycles to UL/CSA Standards
|
Maximum working Thickness |
5.3” (135mm) with 16” Saws |
|
Maximum Distance between Outside Saws |
13.78” (350mm) |
|
Distance from column to link chain center |
14.961” (380mm) |
|
Minimum length to cut – standard 25.591” (650mm) (to 19.7”-500mm w/Short Stock holdown–option) |
|
|
Max. Saw Blade Diameter |
16” (380mm) |
|
Min. saw Blade Diameter |
10” (250mm) |
|
Sawblade bore |
70mm – double keyed |
|
Saw Arbor Diameter |
55mm |
|
Saw Arbor Motors Available |
50 HP (Std) , 60HP or 75HP or 100HP – Optional |
|
Saw Arbor Speed |
3800 RPM (50/60 HP); 3000 RPM (75/100HP) |
|
Variable Feed Speeds |
24~100 FPM (7.5 ~ 30 m/min) |
|
Feed Motor |
2HP std. (3HP optional for extra heavy cutting) |
|
Power rise/fall to pressure rollers |
1HP |
|
Table height from floor |
29.33” (745mm) |
|
Table size |
72” x 31.5” (1840mm x 800mm) |
|
Machine dimensions |
92” x 61” x 59” (2340x1550x1510mm) |
|
Machine Weight |
5280 lbs. (2400 kgs.) |
|
Shipping weight |
5940 lbs. (2700 kgs.) |
|
Shipping dimensions |
82” x 66”x63” (2090x1680x1600mm) |
|
Voltage – to UL/CSA Standards |
available 230, 460 or 575/3/60 (please specify) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASERO
PARTE: 3CH-HFBB - CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASEROBore that can be fits in general 4-side high speed moulders/planers.Standard specifications with single angle 12 or 20 degrees.
-500x500.png)
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
DOBLADORA DE METAL 4' X 12GA PARTE: 2GM-0412EThis machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is powe...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILLCapable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for effi...