Identificador: 722
Abierta
Descripción
PARTE # 11544 - CONTORNEADORA - BALESTRINI - CP-4
EN BUENAS CONDICIONES DE OPERACION
2 TROMPOS Y 2 PULIDORES
MEDIDAS TOTALES: 5.80 MTS LARGO X 3.30 MTS ANCHO X 2.00 MTS ALTO
5 MOTORES 380V, 3 FASES, 50 HZZ
(2 MOTORES DE 7.5 HP, 2 MOTORES DE 4.5 HP Y 1 MOTOR DE 5.5 HP)
VIDEOS DE LA MAQUINA FUNCIONANDO DISPONIBLES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROS
PARTE:
2PG-TNF283 – HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROSNuevo con garantiaThe massive, 12-sided digital TnF-28-3 is a profit center of the busy ceramic studio. It eats up stacks of low-fire ware. At a cost per cubic foot, the TnF-28-3 is one of the most economically priced standard kilns we make.The TnF-28-3 now features sectional construction. Separate the kiln bottom and sections to repair bricks, change elements, or to move the kiln down narrow stairwells or through the narr...
AMXmachinery
ENCHAPADORA CEHISA EP-9
PARTE: 12043 – ENCHAPADORA CEHISA EP-9UsadaEn buenas condiciones
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA
DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES3
HP TEFC Dual Voltage MotorsWired
for 460 Volt, 3 PhaseStart
and E-Stop buttonsLeft
head fixed, Right head manually position via hand crankMinimum
Cut Length @ 90 = 13”Maximum
cut length @ 90 = 100”Both
heads rotate inward 90 to 45 degreeBoth
heads tilt outward to 45 degree for compoundTwo
hand anti tie down cycle control on pedestalBuilt
in 3rd party hydro-checkPne...
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALESNueva con garantíaVariable feeding 20" to 80" to get different setup easily.Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.Max. sanding thickness 4".Min. sanding length 13".Sanding spindle 1-1/4" dia. 2 HP.Max sanding wheel 12" dia.SPECIFICATIONS Wheel, Belt Head Brush Wheel Drive Motor2 HPBrush Tilts 90° ~ 180°Sanding Belt3" x 20"Sanding Wheel Dia. Max8"Sanding Spindle D...