Identificador: 91 Abierta

CORE BUILDER

AMXmachinery

Descripción

PARTE: 2EV-6600 - CORE BUILDER - EVANS 6600

Maquina para hacer el centro o la base de las cubiertas de cocina

The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 Core Builder is a smart investment by helping you and your company save time and money.

MACHINE SPECIFICATIONS:

Machine Length	158"
Machine Width	89"
Machine Height	72"
Working Height	36"
Electrical	220v 60 Hz 3 Ph
Air Supply	100 PSI
Edge Shaper	5 HP 5850 RPM 1.25 Spindle Diameter
Hot Melt Unit	20 lbs Capacity 1500 Watt Heater
Feed Rate	20 FPM
Center Feed Drive	Non-Skid Pad
Board Width	16" Min. to 48" Max
Board Thickness	2" Maximum
Build Up Width	3/4" Min. to 1-1/2" Max.
Build Up Thickness	1-1/2" Maximum
T-Mold Slotter	1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade
Groover	1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express, Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

LIJADORA DE MOLDURAS

PARTE: 2LO-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALESNueva con garantíaVariable feeding 20" to 80" to get different setup easily.Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.Max. sanding thickness 4".Min. sanding length 13".Sanding spindle 1-1/4" dia. 2 HP.Max sanding wheel 12" dia.SPECIFICATIONS Wheel, Belt Head Brush Wheel Drive Motor2 HPBrush Tilts 90° ~ 180°Sanding Belt3" x 20"Sanding Wheel Dia. Max8"Sanding Spindle Di...

AMXmachinery

SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE D

PARTE: 4EL-D - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE D SERIE D-155 SERIE D-185 SERIE D-215 Model & Dimensions (mm) 155 185 215 Maximum cutting length 3300 3300 4300 Maximum cutting height - Horizontal 1505 1805 2105 Maximum cutting height - Vertical 1550 1850 2150 ...