Identificador: 223
Abierta
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COLECTOR DE POLVOS 7 HP
PARTE: 1SL-DC-DC2047 - COLECTOR DE POLVOS 7 HPNUEVO CON GARANTIAMOTOR: 7 HP, 220V, 60 Hz, 3 FASESCAPACIDAD DE SUCCION: 3,500 CFMNUMERO DE BOLSAS Y FILTROS: 4BOLSAS SUPERIORES: 46" ALTOBOLSAS INFERIORES: 32" ALTOMEDIDAS TOTALES: 220 CM LARGO X 100 CM ANCHO X 220 CM ALTOPESO: 100 KGSTIPO DE EMPAQUE: 1 CAJAENTRADA DE 7" DIAMETRO Y CON 1 TAPA CON 4 ENTRADAS DE 4" DIAMETRO CADA UNA
AMXmachinery
CEPILLO 24” ANCHO – MOTOR 5 HP – CUCHILLAS RECTAS
PARTE: 2CA- WP-1124 - CEPILLO 24”
ANCHO – MOTOR 5 HP – CUCHILLAS RECTAS
Nuevo con garantía
Area de la mesa: 25" x 29¼
Cabezal: 3"
Velocidad cabezal: 5000 RPM
Numero de cuchillas: 3
Rodillos alimentacion: 3"
Rodillos mesa: 2-3/8"
Rango de velocidad de alimentacion: 24 FPM
Max.
Depth of Cut: ¼"
Stock
Thickness Range: 1/8" ~ 7-7/8"
Max.
Width of Stock: 24"
Motor
Power Required: 5 HP, 3 PH, 230 V
N.W.: 1000 LBS
G.W.: 1200 LBS
AMXmachinery
ROUTER CNC - 5 x 10 PIES - SCMI
PARTE: 12692 - ROUTER
CNC - 5 x 10 PIES - SCMI
Usado
- Buenas condiciones
SCMI Pratix S 15 CNC 5 x 10
(14) position tool changer
Twin Becker Vacuum pumps.
Professionally disassembled and labeled. Very
low hours.
5 x
10 Scissor Lift Included
AMXmachinery
SIERRA TRONZADORA 18" DERECHA / IZQUIERDA
PARTE # 2EX-XC-18L – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – IZQUIERDA – LEFTPARTE # 2EX-XC-18R – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – DERECHA – RIGHT - OPCIONALNUEVA CON GARANTIAMAQUINA DISPONIBLE PARA USO DERECHO O PARA USO IZQUIERDOPARA DISCO DE CORTE 18"MOTOR 10 HP, 220/460V, 3 FASESFLECHA DE 1" DIAMETROCUBIERTA DE USO RUDO DE FIERRO FUNDIDOCONSTRUCCION DE ACERO PESADO PARA EVITAR VIBRACIONESMAQUINA PARA USO RUDO INDUSTRIALVIAJE DE LA SIERRA CON VELOCID...