Identificador: 678
Abierta
Descripción
PARTE # 11631 - CORFAB MACHINE - MIDWEST AUTOMATION 1520
EN PERFECTAS CONDICIONES, RECONSTRUIDA TOTALMENTE
LISTA PARA OPERAR
ALIMENTACION Y TROMPOS: 3 HP, 230V, 3 FASES, 60 HZ
UNIDAD HOT MELT 230 V, 1 FASE
AIRE 100 PSI
VELOCIDAD 26 FT/MIN
DIMENSIONES TOTALES: 25.5 PIES LARGO X 80" ANCHO X 58" ALTO
ALTURA TRABAJO 36"
PESO ENVIO: 4500 LBS
CORE WIDTH: 14" MIN TO 48" MAX
BUILD UP STRIP: WIDTH 1/2" TO 1-1/2" - THICKNESS 3/8" TO 3/4"
This machine will do the following profiles: 90°, 180°,“D” wrap, self-edge and even ogee. The only profile that the machine will not do is the No-Drip profile.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BASE TROFEO 2 AGUJEROS
BASE TROFEO 2 AGUJEROS5/8” espesor Madera Solida Color encino (OSCURO)
AMXmachinery
ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
PARTE:
2EB-MDWC1500 - ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
NUEVA CON GARANTIAElectric
Start (Battery included), Emergency Stop Lever for Safety,Powerful
13 1/2 HP B&S Gasoline Engine, 4-stroke, air-cooled,Efficient
Disc Rotor cutting up to 4 1/2 in. in diameter,360
degrees rotatable Discharge Chute, 2"
Ball Trailer Hitch,Self-feeding
gasoline engine powered that uses a large disc rotor. Compared to most others
which use a drum style processor, this machine is mo...
AMXmachinery
ESPIGADORA DOBLE - DE MESA - CAPACIDAD 6 - 8 PIES - DT-610
PARTE: 2DO-DT610 - ESPIGADORA DOBLE - DE MESA - CAPACIDAD
6 - 8 PIES - DT-610
NUEVA
CON GARANTIAESCUADRA
Y CORTA A LARGO, ARRIBA Y DEBAJO DE LA PUERTA O TABLERO2
SIERRAS CORTA2
SIERRAS SCORING
CORTE
LIMPIO EN AMBOS LADOS
Features and Benefits:
Easy to load table -
Safely locks in place while loading.
One operator can easily
load the door or panel - Greater efficiency.
One stationary head and
one movable head - Easy to change.
Fixed side, saw tilts;
Mova...
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high