Identificador: 678 Abierta

CORFAB MIDWEST 1520

AMXmachinery

Contacte al Vendedor

Descripción

PARTE # 11631 - CORFAB MACHINE - MIDWEST AUTOMATION 1520

EN PERFECTAS CONDICIONES, RECONSTRUIDA TOTALMENTE

LISTA PARA OPERAR

ALIMENTACION Y TROMPOS: 3 HP, 230V, 3 FASES, 60 HZ

UNIDAD HOT MELT 230 V, 1 FASE

AIRE 100 PSI

VELOCIDAD 26 FT/MIN

DIMENSIONES TOTALES: 25.5 PIES LARGO X 80" ANCHO X 58" ALTO

ALTURA TRABAJO 36"

PESO ENVIO: 4500 LBS

CORE WIDTH: 14" MIN TO 48" MAX

BUILD UP STRIP: WIDTH 1/2" TO 1-1/2" - THICKNESS 3/8" TO 3/4"

This machine will do the following profiles: 90°, 180°,“D” wrap, self-edge and even ogee. The only profile that the machine will not do is the No-Drip profile.

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960

PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia 13-gal. coolant t...

AMXmachinery

SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC

PARTE: 12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC USADO - MUY BUENAS CONDICIONES Make HPC Year 1997 Phase 3 PHASE Voltage 220 VOLT Estimated Dimensions Foot print of line 52' x 15' Estimated Weight 10,000 Lbs (approx) DESCRIPTION: HPC Double Sided Automatic finger joint line Station 1 squares one end and cuts initial finger joint Station 2 squares the other end, cuts finger joint, and applies glue. Station 3 assembles an...

AMXmachinery

LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96”

PARTE: 2DO-PMC-264-1 – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” Nueva con garantíaMaximum Part Length:Pressure Pad Traveling Bar: 96"Pressure Pad Traveling Bar Contact Wheel Assembly: 80" Table size: 30" wide X 96" long Steel table covered with ¾" x 6" pine boardsTable weight capacity: 200 lbOne Abrasive Belt: 6" X 264", 4750 F.P.M.Pulleys: 10" dia. X 6.252 facePressure Pad Traveling BarHand Held Pressure DeviceVertical adjustment: 28"...