Identificador: 1273
Abierta
Descripción
PARTE: 4VE-VRC-1500 – CORTADORA DE FOIL CON NAVAJAS INDUSTRIALES
Nueva con garantía
General
Features
Cutting Machine with industrial blades, which is a perfect solution for slice papers and folio.
Automatic winding brake force air control, contactless and depending on diameter:
Continuous network speed, independent of the diameter.
The minimum setup times, a fast-change blade system
Two winder shaft and also available as friction winding shaft.
Heavy steel frame in robust design.
High drive force for very tight winding.
Deionization is available.
NO STANDARD SPECIFICATIONS QTY
1 Main shaft for fix foil pneumatic with sliding brake system 1
2 Air shafts for winder cut foil 2
3 Shafts with a rubber coating, for tight winding cut PVC film 4
4 Chrome coated shaft with, for tight winding cut PVC film 1
5 The mobility of the machine provide gear reducer and motor, motor speed are adjustable 1
6 All electrical equipment machinery (Telemecanique) 1
7 Emergency stop systems and safety switches 1
8 Sliding brake system can be adjusted to the desired width 1
9 Cutting is provided with the Industrial flat blades (RAZOR BLADES) 10
TECHNICAL DATA
FOİL TYPE : PVC, PAPER
MAX ROLL DIAMETER and WIDTH : 500 mm , 1500 mm
ROLL : 5pcs
MİN-MAX FOIL THICKNESS : 0,15 - 0,40 mm
CUTTING SPEED : 75 m/min
MINIMUM SLICER WIDTH : 30 mm
TOTAL POWER : 3 KW
VOLTAGE : 380 VOLT
FREQUENCY : 50 Hz
WEIGHT : 1000 Kg
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS 19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS
19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
USADO - BUENAS CONDICIONES
MOTOR ½ HP, 220/440V, 3 FASES
RPM 1725
VOL. 10,300 M/H
MEDIDAS: 63 CM ANCHO X 63 CM ALTO X
36 CM FONDO
AMXmachinery
ASERRADERO PORTATIL WOODMIZER LT15
PARTE # 10401 - ASERRADERO PORTATIL WOODMIZER LT15EN BUENAS CONDICIONES DE OPERACION
AMXmachinery
ROUTER CNC - MODEL M
PART # 2TA-M-0408 - ROUTER CNC - MESA 4' X 8' - MOTOR 3 HP - CON MESA DE VACIOPART # 2TA-M-0510 - ROUTER CNC - MESA 5' X 10' - MOTOR 5 HP - CON MESA DE VACIO All “SERVO MOTOR” driving systemPC base CNC controller is set up to accept standard G code programming formats along with on board conversational applications.User friendly IC Control System powerful closed positioning loop software with Ethernet interface for data transfer from PC.All axis are driven by brushless type high torque AC s...
AMXmachinery
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15USADO - MUY BUENAS CONDICIONESSpecifications:Working field for boring & routing: "X" Axis 86.5" (2,200 mm), "Y" axis 35.3" (898 mm) for boring & 37.4" (950 mm) for routing, max. panel thickness 2.5" (65 mm). Positioning speed:"X" axis at 246 FPM (75 MPM), "Y" axis 147 FPM (45 MPM), "Z" axis 49 FPM (15 MPM); "X" axis moves on high precision prismatic guides and ground helical rack; "Y" & "Z" axis via hardened ground ball screw. Work Table:...