Identificador: 2682
Abierta
.jpg)
Descripción
PARTE: 2GL-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALAS
PARA TROMPO O ESPIGADORA
Cuchillas de 2 alas
Puntas de Carburo de Tusgteno
DIAMETRO TOTAL | ESPESOR | FLECHA | LONGITUD JOINT | PARTE # |
160mm | 4.0mm | 70mm | 12mm | 2GB-160X4X0.6X70-2T |
160mm | 4.0mm | 50mm | 12mm | 2GB-160X4X0.6X50-2T |
160mm | 9.0mm | 50mm | 12mm | 2GB-160X9X50-2T |
160mm | 10.0mm | 50mm | 12mm | 2GB-160X10X50-2T |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TRANSPORTADOR RODILLOS - RECTOS - RUEDAS PLASTICO NEGRAS
PARTE: 12343-4 - TRANSPORTADOR RODILLOS -
RECTOS - RUEDAS PLASTICO NEGRAS
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 49 LITROS
PARTE:
2PA-XPRESS-1613-3 - HORNO PARA CERAMICA, VIDRIO, METALES – 49 LITROSNuevo con garantía3" wall for porcelain, so it easily fires ceramics, china paint, decals, and gold. The size is ideal for teachers of china paint or dolls. The 8-sided, 16 ½” wide and 13 ¼” deep interior is as tall as standard 7-sided kilns. The Xpress-1613-3 kiln is 43% larger than the 66-3 series, yet costs only a few dollars more.The Xpress-1613-3 plugs into a 30 amp, 240 volt outlet. (The kiln is also avail...
AMXmachinery
CEPILLO 2 CARAS - ANCHO 25” - CANTEK
PARTE:
12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS
CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads withtwo sided solid carbide knives• Digital electronic thicknessadjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed rollerbefore top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication• New ...
AMXmachinery
RESACADORA DOBLE – 48” CAPACIDAD LARGO
PARTE: 2FA-2NX-48 – RESACADORA DOBLE
– 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HRStandard FeaturesAdjustable
Notch up to 3"Variable
SpeedAlmost Unlimited Capacity Machine
SpecsDimensionsLength:
Model Dimensions 24"Width:
73"Height:
56"Infeed
Height: 40" PowerCutter
Head Motors: 20HP 208/230/480/3/60 TEFCInfeed
Motor:1-1/2 HP 208/230/480/3/60 TEFCVFD:
For lnfeed Motor Variable SpeedCompletely
Pre-Wired Motor Starter with Start/Stop Buttons and Circu...