Identificador: 2077
Abierta
ID de articulo : # 2077 se ha agregado a su lista de deseos.
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30” - WHITNEY
PARTE:
12378 - CEPILLO 2 CARAS - CAPACIDAD 30” - WHITNEY
USADOMotores 15 y 10 HP
AMXmachinery
PARTE: 12343-6 - TRANSPORTADOR RODILLOS - RECTOS - RUEDAS PLASTICO NEGRAS - METAL ROJO
PARTE: 12343-6 - TRANSPORTADOR RODILLOS -
RECTOS - RUEDAS PLASTICO NEGRAS - METAL ROJOUSADOS - MUY BUENAS CONDICIONES
AMXmachinery
TROMPO CON ALIMENTADOR CNC
PARTE # 2AM-540 - TROMPO CON ALIMENTADOR INTEGRADO - CNC - PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5hp 208-230v 3phShaper Speed: 4000 to 7000 rpmSpindle Size: 1 1/4"Feed Speed: Variable to 30 fpmConveyor: 6" wideMax. Part Thickness: 2"Floor Space: 55"w X 38"dPlantilla Centradora para curvas - opcionalNew CNC controlled Model 540 shaper is based on the Model 390 - a proven, reliable workhorse for over 10 years. The 540 was designed to machine arched panels and rails for cabinet...
AMXmachinery
PARTE: 12511 – PRENSA DOBLADORA DE LAMINA – HASTA CAL 14 – LONGITUD 3.05 M
PARTE: 12511 – PRENSA DOBLADORA DE LAMINA –
HASTA CAL 14 – LONGITUD 3.05 M
USADO BUENAS CONDICIONES
HIDRAULICA