Identificador: 189
Abierta
Descripción
PARTE # 12C-EB-2 - ENCHAPADORA DE CANTOS CURVOS Y RECTOS
POTENCIA MAXIMA: 3500 WATTS
VOLTAJE 2: 220 VOLTS
VELOCIDAD VARIABLE: 0-8 METROS/MINUTO
TEMPERATURA OPERACIÓN: 100ºC A 230ºC
CORTADOR: NEUMATICO
ALIMENTADOR: RODILLO DE HULE
PROTECCION RODILLO DE HULE
MESA ALUMINIO
ADHESIVO HOT-MEAL
PESO APROXIMADO 250 KG
PARO DE EMERGENCIA
2 ZONAS DE TEMPERATURA
PIROMETROS DIGITALES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
2 SIERRAS INGLETERAS DOBLES - OMGA
PARTE: 12144 – 2 SIERRAS INGLETERAS
DOBLES - OMGA
USADAS – MUY BUENAS CONDICIONES - COMO NUEVAS
YEAR 2005
AMXmachinery
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...