Identificador: 1714
Abierta
Descripción
PARTE: 2CK-MX550AU
Is a versatile portable edgebanding solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). The full kit includes the portable edgebander, power trimmer, workpiece clamp set, and dual end cutter. The package also comes with packaging for each item and a dolly to make is extra easy to take with you to the site.
- Can apply edgebanding material from 0.4~3mm thick
- Straightforward operation with ergonomic handles and material support plate
- Simple maintenance
- Edgebands straight as well as curved surfaces
- Light weight & portable unit which can be taken to the jobsite
- Automatic glue application with adjustable glue amount control
- Works on 75-90° surfaces
- Glue pot with quick heating time of approximately 8 minutes
- Variable feed speed from 6.5~20 FPM (2-6 m/min)
ERGONOMIC CONTROLS
- Rubber Grips and Metal Support Plate: Two rubber grips allow for precise control of the edgebander while a metal support plate is designed to rest on the workpiece to allow for accurate and simple operation.
- Adjustable Glue Pot Handle: The glue pot handle has two positions in case of work piece interference.
- Tape Insert Guide: A measured guide in increments of 1mm determines the width of the edgebanding or edging tape and secures it in place for a regulated feed.
- Consistent Glue Application: A knob allows for on-the-fly regulation of glue amount for a mess-free, consistent result.
- Digital Temperature Monitor: A digital temperature monitor provides accurate control over glue application. Temperature ranges are 120°C – 200°C ±1°C (250°F – 390°F ±34°F)
Straightline and Contour Edgebanding
Our portable edgebanders are perfect for all varieties and shapes of workpieces. For contoured or curved surfaces, the minimum interior radius is 25mm (1”).
Hotmelt Glue for Edgebanding Bond
The glue is applied directly onto the edgebanding or edging tape. Maintain steady pressure on the workpiece against the feeding roller to apply the edgebanding or edging tape at desired temperature.
Glue-Free Edgebanding
Save money on your edgebanding as the MX550 uses standard tape and does not require pre-glue edgebanding.
Material Compatibility
The MX550 can work with PVC, melamine, laminate, wood and metal edgebanding and edge tape of 0.3mm – 3mm thickness and 10mm – 65mm width.
Angle Adjustment
Our edgebanders can operate on tilted surfaces of 75°-90°, making beveled surfaces as simple as straight ones.
Quick to Start
The MX550 edgebander requires approximately 8 minutes to obtain operating temperature with a full pot of glue. Heat up time is reduced with less glue in the pot.
Built to Last
Quality construction and rigorous testing ensure the MX550 will perform time after time.
Portable and Stationary Use
Designed for transportation and space-efficiency, our MX550 comes with a durable and lightweight case. For handheld operation, workpieces can be secured with our VH03N Vacuum Clamp Set. For stationary operation, the MX550 can also be secured to our optional ST95B Stationary Worktable depending on your needs.
INCLUDES:
- (1) PD80 Power Trimmer
- (1) TK65 Dual End Cutter
- (1) VH03 Suction Clamp Kit
- (1) Glue
- (1) Trolley / Dolly
|
Tape thickness |
0.4 ~ 3mm (0.0016~0.118”) |
|
Width of tape |
10 ~ 65mm (0.4~2.55”) |
|
Feeding speed |
2 ~ 6 m/min (6.5~20 FPM) |
|
Output power |
1.15 HP (855 W) 115/1/60 |
|
Glue pot temperature |
120oC~200oC (250oF~390oF) |
|
Glue pot capacity |
400 ml (13.5 oz) |
|
Unit weight |
8.7 kgs (19 lbs) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
PARTE: 4NE-2AXIS - TORNO PARA MADERA CNC - 2 EJES - 2 AXIS
PARTE: 4NE-2AXIS - TORNO PARA MADERA CNC - 2 EJES - 2 AXISSelf Lubrication System : YES ( Automatic )• Triangle Blade for Gouger ( 10 Pieces )• Rounded Blade for Gouger ( 2 Pieces )• Pegasus Cad Cam 2 Axis Standard Program ( Italian )• Working Dimensions : Max Diameter:280mm Max Lenght: 1000mm• Long Axis Speed (Z): 85 m/dk• Short Axis Speed (X): 30 m/dk• Lathe Turning rpm (C): 6000rpm• Total Power : 8 kw• Weight: 1500 kg• Machine Dimension : Lenght: 2800mm * Width:1360mm * He...
-500x500.png)
AMXmachinery1
CIERRA CINTA 24"
CIERRA CINTA 24" PARTE: 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple desig...
AMXmachinery1
SIERRA CINTA - VERTICAL 2 EN 1
PARTE: 2CK-HB950AIs a heavy duty 37” bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also be ideal for cut...