Identificador: 1492
Abierta
Descripción
PARTE: 2MK-CBC.MR - ENCHAPADORA DE GABINETE CON EXTENSIONES CON RODILLOS
Nueva con garantía
Has a built-in retractable extension table providing a work area 3x times longer whenever opened, it is perfect for long pieces such as doors and panels and it has 6 speeds allowing the operator to work as fast as he wants. If you are looking for an affordable and efficient machine, the 2MK-CBC.MR Black Edition is the ideal machine for you.
WORK AREA
Whenever opened the extension tables will give you 3x the regular work area of the machine.
6 PARAMETERS
With 6 speeds to choose from the feeder switch will work on your desired velocity.
|
Technical Information
|
2MK-CBC.MR
|
|
Glue |
Granulated Hot-Melt |
|
Glue Temperature |
130° to 180º C |
|
Motor specs |
1 Phase 127V 10.2 A 1,300 W |
|
Tape thickness |
0.3 mm – 2 mm |
|
Max. tape width |
3” |
|
Feeder speed |
0 to 26 ft/min |
|
Weight |
242.5 Lbs. |
|
Warranty |
2 years |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA CON TRANSPORTADOR
PARTE: 12398 - ENGOMADORA
CON TRANSPORTADOR
USADO – BUENAS
CONDICIONES26" wide slats210" overall length26" wide rollersMotor 1.5 HP, 1PH
Glue pan
AMXmachinery
LINEA DE CARDADO OPEN END
PARTE: 12133 – LINEA DE CARDADO OPEN ENDACONDICIONAMIENTO, PREPARACIÓN, CARDA Y CONTINUACONTACTENOS PARA MAS FOTOS E INFORMACION
AMXmachinery
CASETA PINTURA CONTINUA PARA MOLDURAS
PART # 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pai...
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...