Identificador: 197
Abierta
Descripción
PARTE # 2TA-EB-3B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-4B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-5B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-6B - ENCHAPADORA DE CANTOS RECTOS
- Automatic feed station for: Gluing, Pneumatic Guillotine, Double End Trimming, Top & Bottom Edge Trimming, Edge Polishing.
- The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber toothed rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of hot melt glue applied on straight Panel for edges banding.
- End Cutting Unit: Pneumatic guillotine application for cutting end of band material
- Double End Trimming Unit: Application for fine trimming front & rear edge by saw blade with two independent motors
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter head with two independent motors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
SPECIFICATIONS | EB-3B | EB-4B | EB-5B | EB-6B |
| PVC Film Band Thickness | 0.4 ~ 3 MM | 0.4 ~ 3 MM | 0.4 ~ 3 MM | 0.4 ~ 3 MM |
| Wood Strip Band Thickness | ~ | Max. 3 MM | Max. 8 MM | Max. 8 MM |
| Work Piece Thickness | 10 ~ 50 MM | 10 ~ 50 MM | 10 ~ 50 MM | 10 ~ 50 MM |
| Work Piece Min. Length | 6.3" | 6.3" | 6.3" | 6.3" |
| Work Piece Min. Width | 3.5" | 3.5" | 3.15" | 3.15" |
| Edge Band Feed Motor | 0.025 KW | 0.025 KW | 0.025 KW | 0.025 KW |
| Gluing Motor | 0.75 KW | 0.75 KW | 0.75 KW | 0.75 KW |
| End Trimming Speed | ` | 12000 RPM | 12000 RPM | 12000 RPM |
| End Trimming Motor | ` | 0.35 KW | 0.35 KW x 2 | 0.50 KW x 2 |
| Rough Edge Trimming Speed | ~ | ~ | ~ | 12000 RPM |
| Rough Edge Trimming Motor | ~ | ~ | ~ | 1.1 KW x 2 |
| Scraping Unit | ~ | ~ | Top & Bottom | Top & Bottom |
| Fine Edge Trimming Speed | 12000 RPM | 12000 RPM | 12000 RPM | 12000 RPM |
| Fine Edge Trimming Motor | 0.7 KW x 2 | 0.7 KW x 2 | 0.7 KW x 2 | 0.7 KW x 2 |
| Polish Wheel Speed | 1400 RPM | 1400 RPM | 1400 RPM | 1400 RPM |
| Polish Motor | 0.18 KW x 2 | 0.18 KW x 2 | 0.18 KW x 2 | 0.18 KW x 2 |
| Feed Speed | 1 ~ 40 FPM | 0 ~ 49 FPM | 0 ~ 49 FPM | 0 ~ 49 FPM |
| Feed Motor | 1.5 KW | 1.5 KW | 1.5 KW | 1.5 KW |
| Heating Glue Tank Power | 2.3 KW | 2.3 KW | 2.3 KW | 2.3 KW |
| Heating Element Power | 0.12 KW | 0.12 KW | 0.12 KW | 0.12 KW |
| Total Power | 6.43 KW | 7.43 KW | 7.43 KW | 9.63 KW |
| Machine Size (L x W x H) | 112" x 49" x 61" | 152" x 49" x 61" | 164" x 49" x 61" | 176" x 49" x 61" |
| Net Weight | 1600 LBS | 2500 LBS | 2900 LBS | 3500 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE PANELES 3200 MM
PARTE # 2TA-TS-P330R - SIERRA DE PANELES 3200 MMSpecifications2TA-TS-P330R2TA-TS-P380RCapacityMax. Cutting Length126" (3200 mm)150" (3800 mm)Max. Cutting Height0 ~ 4",Optional:5" (0-100 (Optional:120 mm))Main SawbladeDiameterØ16" (Ø18") (Ø405 mm (Ø455 mm))Arbor DiameterØ2" (Ø60 mm)Speed3910 RPMScoring SawbladeDiameterØ7" (Ø180 mm)Arbor DiameterØ2" (Ø45 mm)Speed5100 RPMSaw CarriageForward Speed5 ~100 M/ minReturn Speed120 M/ minMotorMain Sawblade Motor20 HP (Optional: 25 HP)Scoring Sa...
-500x500.jpg)
AMXmachinery
CEPILLO 2 CARAS – 24” ANCHO
PARTE: 2EX-XP-224T – CEPILLO 2 CARAS – 24” ANCHO
Nuevo con garantía
2 motores, 25 y 20 HP
Factory
wired 230 Volts, 3 Phase
Vector
Style 6 Row top cutter head for EP-224 with arch faced 15mm x 15mm x 2.5mm
cutter tips on a shear angle
Vector Style 6 Row
Bottom cutter head for EP-224 with arch faced 15mm x 15mm x 2.5mm cutter tips
on a shear angle
MAIN
TECHNICAL FEATURES 2EX-XP-216T 2EX-XP-224T
Top Motor H...
-500x500.jpg)
AMXmachinery
BANDA PARA CEPILLO 12.5"
PARTE # SIL-R-CM12.5B-A26
2 BANDAS PARA CEPILLO 12.5 PULGADAS SILVERLINE
MARCA / TIENDA: SILVERLINE / AMX MACHINERY
- Nuevas y originales.
- Los precios son en pesos e incluyen IVA.
- Enviamos su factura.
- Flete incluido a las principales ciudades de México.
- Pregunte por Cobertura de Flete a su Ciudad y
Tiempos de Entrega antes comprar.
850.00 MXN
AMXmachinery
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM
INTERNO - 18” DIAM EXTERNO - 1 HP
USADO - MUY BUENAS CONDICIONES
MOTOR 1 HP, 220/440V, 3 FASES, RPM
1750