Identificador: 197
Abierta
Descripción
PARTE # 2TA-EB-3B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-4B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-5B - ENCHAPADORA DE CANTOS RECTOS
PARTE # 2TA-EB-6B - ENCHAPADORA DE CANTOS RECTOS
- Automatic feed station for: Gluing, Pneumatic Guillotine, Double End Trimming, Top & Bottom Edge Trimming, Edge Polishing.
- The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber toothed rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of hot melt glue applied on straight Panel for edges banding.
- End Cutting Unit: Pneumatic guillotine application for cutting end of band material
- Double End Trimming Unit: Application for fine trimming front & rear edge by saw blade with two independent motors
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter head with two independent motors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
SPECIFICATIONS | EB-3B | EB-4B | EB-5B | EB-6B |
| PVC Film Band Thickness | 0.4 ~ 3 MM | 0.4 ~ 3 MM | 0.4 ~ 3 MM | 0.4 ~ 3 MM |
| Wood Strip Band Thickness | ~ | Max. 3 MM | Max. 8 MM | Max. 8 MM |
| Work Piece Thickness | 10 ~ 50 MM | 10 ~ 50 MM | 10 ~ 50 MM | 10 ~ 50 MM |
| Work Piece Min. Length | 6.3" | 6.3" | 6.3" | 6.3" |
| Work Piece Min. Width | 3.5" | 3.5" | 3.15" | 3.15" |
| Edge Band Feed Motor | 0.025 KW | 0.025 KW | 0.025 KW | 0.025 KW |
| Gluing Motor | 0.75 KW | 0.75 KW | 0.75 KW | 0.75 KW |
| End Trimming Speed | ` | 12000 RPM | 12000 RPM | 12000 RPM |
| End Trimming Motor | ` | 0.35 KW | 0.35 KW x 2 | 0.50 KW x 2 |
| Rough Edge Trimming Speed | ~ | ~ | ~ | 12000 RPM |
| Rough Edge Trimming Motor | ~ | ~ | ~ | 1.1 KW x 2 |
| Scraping Unit | ~ | ~ | Top & Bottom | Top & Bottom |
| Fine Edge Trimming Speed | 12000 RPM | 12000 RPM | 12000 RPM | 12000 RPM |
| Fine Edge Trimming Motor | 0.7 KW x 2 | 0.7 KW x 2 | 0.7 KW x 2 | 0.7 KW x 2 |
| Polish Wheel Speed | 1400 RPM | 1400 RPM | 1400 RPM | 1400 RPM |
| Polish Motor | 0.18 KW x 2 | 0.18 KW x 2 | 0.18 KW x 2 | 0.18 KW x 2 |
| Feed Speed | 1 ~ 40 FPM | 0 ~ 49 FPM | 0 ~ 49 FPM | 0 ~ 49 FPM |
| Feed Motor | 1.5 KW | 1.5 KW | 1.5 KW | 1.5 KW |
| Heating Glue Tank Power | 2.3 KW | 2.3 KW | 2.3 KW | 2.3 KW |
| Heating Element Power | 0.12 KW | 0.12 KW | 0.12 KW | 0.12 KW |
| Total Power | 6.43 KW | 7.43 KW | 7.43 KW | 9.63 KW |
| Machine Size (L x W x H) | 112" x 49" x 61" | 152" x 49" x 61" | 164" x 49" x 61" | 176" x 49" x 61" |
| Net Weight | 1600 LBS | 2500 LBS | 2900 LBS | 3500 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10128 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
(2) COMPRESORES DE AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE HORIZONTAL
PARTE: 12405-3 - (2) COMPRESORES DE
AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE
HORIZONTAL
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PARTE: 12134 – PRENSA CALIENTE – 5 PLATOS
PARTE: 12134 – PRENSA CALIENTE
– 5 PLATOS
USADA – EN BUENAS CONDICIONES
4' x 8'
52" x 100" x 1.750" platens
3" of daylight
500 ton capacity
120 gallon hydraulic unit with 6 hp volume pump
7 hp-3600 rpm high pressure pump
AMXmachinery
CENTRO DE MAQUINADO
PARTE # 2MA-949VPKG - CENTRO DE MAQUINADONUEVO CON GARANTIAStandard Features: - Taiwan Mill- “Meehanite” Casting- “Turcite B” Coating on X/Y ways- ISO 9001 certified- Coolant system included- GMM-949V has variable spindle speeds from 70-4,300 rpm - Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion )- Heavy Duty “Meehanite” casting- Hardened & ground dovetail guideways- ...