Identificador: 2047
Abierta
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2TA-SET-106TS – ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
Nueva con garantia
Opcionales:
Extra Infeed 42” Length
Total Enclosure Cover
Feed Magazine
Auto Transfer Line (4 ft x 8 ft) Transfer Table
Optional Jump Shaper and Finish Shaper Cutter heads
Optional Center Split Saw Station
Features:
• The automatic high-speed through feed device allows for perfect finishing at speeds ranging
from 12 ~ 52 FPM.
• Suitable for mass production of woodworking factory for processing of double end cutting,
tenoning, grooving, moulding, and sanding.
• Scoring Saw, Trim Saw , Hogging/ Coping Shaper: Total 3 stations at each sides.
• Reversed direction cutting jump shaper head with sensor for automatic move in and out for
prefect cutting to prevent tearing at end edge.
• It is a powerful machine great for heavy-duty production.
• In addition to the double end cutting, all the settings and other processing can also be executed
with high accuracy
Since the machine is so versatile, we believe it will be one of the most satisfactory machines for
bulk production lumber-processing factories.
• The specially designed numeric controller allows quick setting of sizes for tolerance within
0.004”.
• Variable speed, through feed, wide rubber pad, spring-loaded dots conveyor for the best finish
selections.
• Heavy-duty pressure rolls at top of wide width conveyor to hold the material tight to prevent
sliding during the cutting process.
• Shaper head can be moved up & down, forward & backward.
• Equipped with industrial motor for full power cutting capacity.
SPECIFICATIONS: SET-86TS / 106TS-SJC
Max. Working Thickness 2”
Max. Working Length 96" / 120”
Trim Saw Blade (Diameter) 10" x 1"
Shaper Cutter (Diameter) 6" ~ 8" x 1"
Feed Speed 12' ~ 52' Variable
Motor 3 PH, 220/440 V
Trim Saw 10 HP x 2
Jump Shaper 7-1/2 HP x 2
Fixed Shaper 7-1/2 HP x 2
Sanding ---
Feeding 2 HP x 1
Width Setting ½ HP x 1
Machine Size (L x W x L) 13' /15' x 8' x 6'
N.W. 3500 / 3800 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
INSERTADORA TACHUELAS
PARTE: AMX-AG-001 - INSERTADORA DE TACHUELASNueva con garantiaSe tiene que ajustar la manija a la posicion correcta.Para asegurar la correcta posicion baje el cabezal hasta que toque la mesa.Colocar las tachuelas adecuadamente es importante mientras usa la maquinaSostenga la tachuela con 2 dedos en la cavidad tan derecha como sea posible, con la practica este proceso se hace más fácil.Centre la placa en la base usando una tira pequeña de tape para que no se mueva.Es recomendable hacer agujero...
AMXmachinery
BASTONERA 6" - 8"
PARTE # 1N-BTA-007 - BASTONERA - CAPACIDAD DE 6" - 8" DIAMETRONueva con garantiaMotor principal: 10 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 2 HP, 220V, 60 Hz, 3 fases, A 4,500 RPMVelocidad alimentación: Variable, hasta 12 metros por minutoLa maquina incluye cabezalLa maquina es nueva e incluye garantía de 6 meses en partes mecánicasLos dados para las diferentes medidas se venden por separadoNueva con garantía de 6 meses en partes mecánicasInlcuye 1 juego de cuchillas de 2 navajas de ac...
AMXmachinery
PARTE: 1SE-0021 - FINGER JOINT - PRENSA
PARTE: 1SE-0021 - FINGER
JOINT - PRENSA
Nuevo con garantía en
partes mecánicas solamente
3 pistones neumáticos
para movimientos de las prensas
Filtro y regulador de
presión
Válvula neumática de 3
posicionesVideo: https://vimeo.com/854503314
AMXmachinery
ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
PARTE:
12355 – ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
USADO EN BUENAS CONDICIONESYear:
2011 RPM:
appx. 90 Pressure:
2600 psi HP: 72 Rated
for 6000 lbs. of paper per hour No
screen,Electric:
460v, 3
phase, 60Hz, 125 AmpShredding
technology for waste made of wood, plastic or paper. The WL 15 single-shaft
shredders have proven themselves to be the classic shredders for wood waste of
all kinds, and can be found in thousands of woodworking shops all over the
...