ID: 2927
Open
.PNG)
Description
PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJES
Is a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volume
production requirements.
- Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.
- Climb cut of both tenon and mortise cuts for a tear out free cut.
- The ability to cut MDF paper or vinyl wrapped profiles.
- Eliminates the need for applying inlays.
- Reduces the maintenance and cost associated with the tooling by more than 50% by eliminating end coping.
- Eliminates the need for outside profiling or sanding the edges of doors
- Eliminates the need for sanding the face of the doorsBoth stiles and rails are run face down for consistency of machining.
- Self aligning joints
- There is a more durable and aesthetically pleasing blind joint (no visible joint on edge of board)
- Multiple tool paths to choose from in tenon and miter (on the mortise side) to accommodate all profiles.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensures a perfectly square...
-500x500.png)
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...