Identificador: 1632
Abierta
Descripción
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO
- PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA CAL. 20 CON GOTERÓN EN LAMINA CAL. 18
- SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA
- INCLUYE FILTROS TIPO LABERINTO - INCLUYE CAPELOS PARA ILUMINACIÓN
- NO INCLUYE DUCTERÍA NI EXTRACTOR
|
Cantidad de
Capelos
|
Largo
|
|
1 |
1 m |
|
2 |
1.5 m |
|
2 |
2 m |
|
2 |
2.5 m |
|
2 |
3 m |
|
3 |
3.5 m |
|
3 |
4 m |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
FRENO PARA DOBLADORA DE METAL
FRENO PARA DOBLADORA DE METAL PARYE: 2GM-SB-1014ISO 9002 certifiedLarge 3” beam opening, adjustable1” beam adjustment (front and back)Stop rods for repeat bends(2) counter weightsAll steel heavy body construction with extra heavy tie rod for minimum deflectionBending Capacity: Mild Steel14 Ga.Bending Capacity: Stainless Steel18 Ga.Bending Length Capacity10'Bending Angle Degree0-135°Beam adjustment, front and back1"Minimum reverse bend5/16"Manual clampingSt...
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
AMXmachinery1
LIJADORA DE CANTOS
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...