Identificador: 596
Abierta
Descripción
PARTE: 1AM - EXTRACTOR CENTRIFUGO BAJA PRESION
| ||||||||||||||||||||||||||||||||||||||||||
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”
AMXmachinery
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12567 - REASERRADORA
HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas condiciones
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
AMXmachinery
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASE
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE16 VELOCIDADES: 220 - 3320 RPMCHUCK: 3 A 16 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 83 MMDISTANCIA DEL CHUCK A LA MESA: 595 MMDISTANCIA DEL CHUCK A LA BASE: 1780 MMDIMENSIONES DE LA MESA: CIRCULAR DE 290 MMDIMENSIONES TOTALES: 1570 MM X 600 MM X 300 MMPESO: 69 KGSEMPAQUE: 1 CAJA
AMXmachinery
TALADRO UNION BASTIDORES - 1 TALADRO
PARTE # 2RT-R200T - TALADRO UNION BASTIDORES - 1 TALADRO1.5 HP Spindle Drive Motor, TEFCManual Controls, 1-Phase, 110 V, 60 HzFoot Actuated Boring Cycle14 Degree Single Spindle6,100 RPM Spindle SpeedBall Bearing Collet Guide Bushing Block24” x 30” Table AreaAdjustable Fence with (2) StopsTooling IncludedDesigned and Manufactured in the USAAdditional options for this machine include:R200T3 – 1.5 HP 3-Phase 230/460 VoltHis machine is part of the R200 assembly system that includes the R200E/A...