Identificador: 2945
Abierta
ID de articulo : # 2945 se ha agregado a su lista de deseos.
Descripción
PARTE: 12708 - ASERRADERO - WOODMIZER LT40 - MOTOR ELECTRICO 20 HP
USADO - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 36210
PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
10 HP motor, belt driven to spindle
25,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
43" x 31" acrylic topped table
36" throat depth
3-Position adjustable depth stop, infinitely
adjustable
Maximum workpiece/template height is 4"
3/4" max. Chucking capacity
Magnetic starter with over...
AMXmachinery
ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
PARTE:
12355 – ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
USADO EN BUENAS CONDICIONESYear:
2011 RPM:
appx. 90 Pressure:
2600 psi HP: 72 Rated
for 6000 lbs. of paper per hour No
screen,Electric:
460v, 3
phase, 60Hz, 125 AmpShredding
technology for waste made of wood, plastic or paper. The WL 15 single-shaft
shredders have proven themselves to be the classic shredders for wood waste of
all kinds, and can be found in thousands of woodworking shops all over the
...
AMXmachinery
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
PARTE: 12385 -
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
USADA - BUENAS
CONDICIONES54" Dia. Wheels with 6-1/2" Face7" x 29'0" blade SizeAir Tensioning with Dial Adj. for Top WheelSelf Centering Feed Works that can also be preset to a sizesix 7" Dia. x 12" High Smooth Feed Rolls (Three
Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw
Blade21" Max. Feed Roll Opening( 12" Outside Sawline,
9" Inside SawlineSteel Weldment Roll Cradle with Chrome Plate...