Identificador: 1882
Abierta
Descripción
PARTE: AMX-10133 - EXTRACTOR DE TURBINA - ½ HP
USADO - BUENAS CONDICIONES
MEDIDAS: 15” ANCHO X 15” FONDO X 18” ALTO
ENTRADA REDONDA 5”
SALIDA RECTANGULAR 3” X 2.5”
MOTOR ½ HP, 220/440V, 3 FASES
Pago y Devoluciones
- Forma de pago
- PayPal, Visa/Mastercard/American Express
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- comprador puede recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BASTONES - 2 LIJAS
PARTE: 2SW-FS-80B2 - LIJADORA DE BASTONES
- 2 LIJAS
NUEVA CON GARANTIASpecificationsSanding
Belt Drive Motor: 5HPDust
Sution Motor: 1/2HPSanding
Belt Size: 5" X 73”Applicable
Rod Diameter: Ø5-Ø80mmFeed
Speed (Variable): 1-20m/mmSanding
Belt Linear Speed: 1080m/mmNet
Weight: 450kgsGross
Weight: 530kgsMachine
Dimensions (L*W*H): 1050*850*1300mmPacking
Dimensions (L*W*H): 1120*920*1520mm
Design
and specifications are subject to change wi...
AMXmachinery
SIERRA CINTA INDUSTRIAL - USO RUDO - MOTOR 7.5 HP Y 10 HP
PARTE # 1N-SCA-7.5 - SIERRA CINTA – VOLANTE 31.5” (80 CM) – MOTOR 7.5 HP - USO RUDO INDUSTRIALPARTE # 1N-SCA-10 - SIERRA CINTA – VOLANTE 31.5" (80 CM) – MOTOR 10 HP - USO RUDO INDUSTRIALNueva con garantía
Volante de 31-1/2”
(80 cm) diámetro, para sierra cinta de 2” de ancho
Para uso industrial, rudo y continuoVolante de 31-1/2”
(80 cm) diámetro, para sierra cinta de 2” de ancho
Para uso industrial, rudo y continuoVideo: https://vimeo.com/584002334
CARA...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 12631 – TROMPO AUTOMATICO – REDONDO – LOBO
PARTE: 12631 – TROMPO AUTOMATICO – REDONDO – LOBO
USADO – MUY BUENAS CONDICIONESThe
only issue we can find is the one top display light is out.Everything
else is functional. It
features dual 1-1/4″spindles that are 5-5/8″ tall.This
fully functional machine has been fully cleaned, checked, and is ready to work
from the time you receive it. Model LH-40-TCCutting
capacity ...