Identificador: 327
Abierta
ID de articulo : # 327 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM
NUEVA CON GARANTIA
Heavy duty construction provides vibration free operation. Easy to set up and adjust.
Manual raise, lower and tilt of main blade and scoring saw.
Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.
Sealed main shaft bearings (lubricated for life) with vibration dampening system.
Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.
Specially designed roller carriage, utilizing aluminum pro files for lighter weight.
Stable, torsion free cross slides with low resistance swinging support arm.
Extra attention paid to the sliding table mechanism, ensuring absolute rigidity of the entire sliding assembly.
Base welded from cold, rolled heavy gauge steel plate, providing a rugged assembly and long term accuracy of the entire machine.
Industrial grade, high power rated motor for long life and heavy duty performance.
Telescoping cross cut fence, extendable to the full 63” stroke of the sliding table. Fence can be utilized for up to 45 degree miter cutting.
All painted surfaces with special heavy grade priming and finish for long term protection.
All none painted aluminum surfaces, anodized
SPECIFICATIONS | LB-TS-P1600MA | LB-TS-P2500MA | LB-TS-P3200MA |
Sliding Carriage Dimensions | 63" x 14" | 98" x 13" | 126" x 13" |
Max. Cutting Length | 63" | 98" | 122" |
Ripping Capacity | 49" | 49" | 49" |
Saw Blade Inclination | 90° ~ 45° | 90° ~ 45° | 90° ~ 45° |
Maximum Depth of Cut at 90° | 3.3" | 3.3" | 3.3" |
Maximum Depth of Cut at 45° | 2.6" | 2.6" | 2.6" |
Main Saw Maximum Blade Dia. | 14" | 14" | 14" |
Saw Blade Shaft Dia. | 30 MM | 31 MM | 32 MM |
Blade Rotation Speed (RPM) | 2800/4000/5600 | 2800/4000/5600 | 2800/4000/5600 |
Saw Blade Motor Power | 5 HP | 5 HP | 7.5 HP |
Scoring Saw Blade Dia. | 125 MM | 125 MM | 125 MM |
Saw Blade Shaft Dia. | 20 MM | 20 MM | 20 MM |
Blade Rotation Speed (RPM) | 8000 | 8000 | 8000 |
Scoring Motor Power | 1 HP | 1 HP | 1 HP |
Saw Up & Down, Tilting Motor | MANUAL | MANUAL | MANUAL |
Power | 220V 3PH | 220V 3PH | 220V 3PH |
N.W. | 960 LBS | 1650 LBS | 1800 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12082 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT R931
PARTE: 12082 – AFILADORA DE CUCHILLAS – WEINIG
RONDAMAT R931
USADA - BUENAS CONDICIONES
1.5 HP motor
with variable-speed
Will handle
heads up to 9-1/16”-long and 11-27/64”-diameter.
Includes
coolant pump and reclamation system.
Weinig’s best selling profile grinder will hold .000196 tolerances.
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
PARTE: 12562 – RESACADORA DE TARIMAS - DOBLE - MORGAN - CON ALIMENTADOR
PARTE: 12562 – RESACADORA DE TARIMAS - DOBLE - MORGAN - CON
ALIMENTADOR
USADA - BUENAS CONDICIONESElectrical: 480v, 60hz, 3phThis machine is equipped with a hydraulic unscramblerIncludes 5 hp Hydraulic PumpUnscrambler and the saw are able to handle wood planks 26”-70” long approx(2) 9.5” cutterheadsCutterhead has individual manual lateral adjustment controlsEach head is belt driven via dedicated 25hp motorIncludes control panel with push button controlsIncludes side mounted electrica...
AMXmachinery
SIERRA ESCUADRADORA SCM MINIMAX S315WS
PARTE # AMX-10054 - SIERRA ESCUADRADORA – SCM - MINIMAX S315WSEN MUY BUENAS CONDICIONESLA MAQUINA ESTA COMPLETA Y YA DESARMADA LISTA PARA ENVIO EN SU TARIMA DE MADERAMOTOR: 5 HP, 230V, 60HZDISCO PRINCIPAL: DIAMETRO 12” (315 MM MAX) FLECHA 30 MM, 4200 RPM - INSTALADODISCO INCISOR: DIAMETRO 4-3/4” (120MM), Z 20, FLECHA 20 MM, 9300 RPM - INSTALADOLARGO CARRO: 3200 mm (126”)LARGO AGARRADERA DEL CARRO: 360 mm (14”)LARGO CARRO TOTAL: 3560 mm (140”)MODELO: 2005HECHA EN ITALIAPESO MAQUINA: 5...