Identificador: 2562
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
FRENO HIDRAULICO DE PLANO RECTO PARTE: 2GM-HSB-1014
- Taiwan Machines
- ISO 9001 certified
- Hydraulic adjustment for opening
- Hydraulic power clamping for workpiece
- 26” manual back gauge with handwheel
- 1” manual beam adjustment ( front and back )
- Min. reverse bend is ¾” (20mm)
- Heavy welded all steel construction for maximum rigidity
- Germany Rexroth Hydraulic logic system centrally located and quiet
- A wide guidebody ensures strong, stable, smooth & accurate movement
- Comes with one 10’ straight finger
- Central control panels on each side for convenient operation
- Jog and auto operation modes
- Overload protection and disconnect switch
- One year warranty for parts
- Assorted fingers
- 26” manual back gauge with one side handwheel operation
- Angle set up dial
- Hydraulic clamping system
- Foot pedal control for hydraulic clamping & auto mode
Max Bending Length: | 10' |
Bending capacity: |
10’x 14Ga |
Straight Finger Lenght: | 10'1" |
Bend Degree: | 135 |
Max. box & pan depth with | 4" |
Large Beam Opening: | 3" |
Manual Back Gauge: | 26” |
Oil Tank Gal. | 17 Gal. |
Hydraulic Oil: | Shell #68 or equivalent |
Main Motor | 5 HP 3 Phase Prewired: 220VAC 20A Optional: 440VAC 10A |
Weight | 6,850 lbs. |
Shipping Weight: | 6,950 lbs. |
Overall Dimensions | 142" x 46" x 66" |
Shipping Dimensions: | 153” x 41” x 67” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
PARTE: 3AM-G4028 - SIERRA CINTA PARA METAL
PARTE: 3AM-G4028 - SIERRA CINTA PARA METALMax. Cutting Diameter ： Round: 280 mmPlate: 190*400 mmBlade Speed： 25.46.79 m/minBlade Size： 0.9*27*3505 mmMotor Output： 2.2 kwHydraulic Pressure： 0.37 kwCoolant Pump： 0.04 kwTable height： 600 mmMachine Size(L*W*H) ： 1800*800*1230 mmNet Weight： 800 kgVice clamping ： HydraulicBlade tensioning form ： MaunalFeeding cut adjust way ： Hydraulic steplessFeeding way ： ManualHydraulic cooling way ： Natural Wind coolingChip conveyor wa...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS
COLECTOR DE POLVOS PARTE: 2GM-WDC-2100Our wet dust collector system offers safe and efficient method for collecting hazardous dust particles cause by grinding, sanding, or cutting metals. If you’re in the market for a stainless steel wet dust collector that helps eliminate hazardous matter from your machine shop that is created by either a grinding, sanding, or a cutting process, then look no further. Call us today to better understand your process/application and pr...
-500x500.png)
AMXmachinery1
2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 3''
PARTE: 2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 3''Fully equipped with a 3" die set to roll metal square tube into rings. Perfect solution for any fabrication shop looking to speed up the manual process. These metal roller benders are popular amongst the metal fence manufacturing, green house manufacturing, roll cage fab shops, and welding fab shops. ISO 9001 certifiedHydraulic top roller positioning with digital readoutMax capacity: 4” tube and 3-1/2” pipeHeavy Duty 5-1/2HP AC main motorHeav...