Identificador: 462
Abierta
Descripción
PARTE: 1SL-DC-GC1 - GARRUCHA DE CADENA - 1 TON
CAPACIDAD 1 TONELADA
CADENA DE 3 METROS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TRITURADORAS DE MINERAL - MOLINO ALPINE AUGSBURG - 150 HP
PARTE: 12308 - TRITURADORA DE
MINERAL - MOLINO ALPINE AUGSBURG - 150 HP
USADA - BUENAS CONDICIONES
NO TIENEN MOTORES ACTUALMENTE, PERO LLEVAN LOS SIGUIENTES
MOTORES
MAQUINA DE 150 HP
MOTOR PRINCIPAL: 150 HP
MOTOR SECUNDARIO: 50 HPVideo1: https://vimeo.com/774524950
Video2: https://vimeo.com/774526264
AMXmachinery
ESCOPLO OSCILANTE 2 MESAS
PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERYNueva con garantiaA faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.Two working tables built in both side of the machine to double the production for high efficiency mortising operation.Pneumatic hold down clamps and pneumatic depth movement for smooth finish.Fully automatic mortise produce cycles simply by stepping on the foot pedal.Hydraulic pistons for drillin...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESFriulmac
AutomaticCut Off
MachineCutting
Length 6.29" - 59.05"Working
Width 1.18" - 5.51"Working
Thickness 0.47" - 1.37"Four 4HP
(3KW)Trim/Cut-off Motors 2 (2 each side)Saw
Blade Diameter 150mm Max X 30mm boreDust
Collection 4 X 120mm Outlets
New in
2019Video: https://www.youtube.com/watch?v=b5BPcY82hjs
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...