Identificador: 1271
Abierta
Descripción
PARTE: 4VE-VS350-L5-W - LAMINADORA DE MOLDURAS – PUR HOTMELT
Nueva con garantía
Para recibir cotización formal y detallada avísenos
General Features
This machine is designed to cover MDF, PVC and Alumınum profiles with PVC, PP, Finish Fail [Paper] fail by apply SOLVENT [PU] glue.
Drives with frequency control,
The units of cleaning and pre-working lor top and sides,
Solvent glue application tank
The control system with easy-to-use,
Easy-to-use quick-change winder system
Easy-to-use quick-change winder system
Silicone rubber rollers
Edge control system with precision fastening
Primer unit system
Protective tape attaching unit
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
RODILLOS POLIURETANO
RODILLOS DE POLIURETANO PARA POSTFORMADORAS EVANS MACHINERYPARTE # 2EV-10707 - RODILLO DE SILICONPARTE # 2EV-10708 - RODILLO CORTOPARTE # 2EV-10709 - RODILLO LARGO
AMXmachinery
PARTE: 2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICA
PARTE:
2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICANUEVA CON GARANTIAThe U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for many years of trouble free operation. The design of the U-300 allows the operator to set the front and back measuring stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails are driven or stacked anywhere along the frame joint. The V-Nail insertion is a...
AMXmachinery
PRENSA FRIA – CAPACIDAD 1250 X 2500 MM – 50 TON
PARTE: 3UD-CP48X50T – PRENSA FRIA – CAPACIDAD 1250 X 2500 MM – 50 TON
Nueva con
garantía
MODELO
3UD-CP48X50T
WORKING TABLE
SIZE
1250X 2500 MM
MAXIMUM PRESSURE WORKIG TABLE
50 TON
MAXIMUM
OPEN DISTANCE PRESS PLATE
1000/1300/1500
MM
OIL
CYLINDER
90 MM
X 2 PCS
HYDRAULIC
MOTOR POWER
4.0 /
5.5 KW
...