Identificador: 2935
Abierta
ID de articulo : # 2935 se ha agregado a su lista de deseos.
Descripción
PARTE: 12705 - CANTEADORA - DELTA - DJ-20
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 14” DIAMETRO - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS
DE 14” DIAMETRO - PISTORIUS EMN-14
Usada - Excelentes condiciones - Solo se uso para hacer muestras
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 Arrancadores Termomagneticos nuevos WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guia izquierda: 37” largo
Guia derecha: 22” largo
Pneumatic peda...
AMXmachinery
PARTE: 2WO-001 - SEPARADOR MAGNETICO – USO RUDO
PARTE: 2WO-001 - SEPARADOR MAGNETICO – USO RUDO
Nuevo con garantía
Motor 3HP, 220/440V, 3 fases
Banda: 32” x 6 pies
Lengh: 89.6in
Width: 49in
Height: 22.5in
Weight: 1710 lbs
Reduction ratio: 1:15
Roller rotational speed: 116RPM
Medidas de envio: 2276 LARGO X
1216 ANCHO X 572 ALTO (MM)
Peso: 776 kg
-500x500.jpg)
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...